Product Description
Abrasion Strength Tester
The device is used to check abrasion strength of printed circuit boards scratches are made across five pairs of conducting parts and the intervening separations at points where the separations will be subject to the maximum potential gradient during the tests.
The scratches are made by means of a hardened steel pin, the end of which has the form of a cone having a tip angle of 40°, its tip being rounded and polished, with a radius of 0,25 mm ± 0,02 mm. Scratches are made by drawing the pin along the surface in a plane perpendicular to the conductor edges at a speed of 20 mm/s ± 5 mm/s. The pin is so loaded that the force exerted along its axis is 10 N ± 0,5 N.
The scratches shall be at least 5 mm apart and at least 5 mm from the edge of the specimen.
Power Supply
|
220V 50Hz or 115V 60Hz
|
Tip Angle of Steel Pin
|
40°
|
Radius of Steel Pin
|
0,25 mm ± 0,02 mm
|
Scratche Speed
|
20 mm/s ± 5 mm/s
|
Force
|
10 N ± 0,5 N
|
Scratche Angle
|
80-85°
|
Scratche Distance
|
Adjustable
|
Control System
|
PLC
|
Worktable
|
eddy
|
Conforms to Standard
|
IEC60335-1 clause21.1,IEC60950 clause 2.10.8.4
|
Company Name:Guangzhou Zhilitong Electromechanical Co.,Ltd
Contact Person: Mr Steve Huang
Email : zhilitong2013@gmail.com
Twitter: https://twitter.com/glowwire
Facebook: http://www.facebook.com/trackingtest
Linkedin: http://www.linkedin.com/in/glowwire
Web: http://www.electricaltest.com.cn
Phone : 8620 8160 0135
Fex: 8620 8160 0150
IECEE Recommended Suppliers: http://www.iecee.org/ctl/equipment-suppliers.html
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,