Home > Products > Metallurgy , Mining & Energy > Metallurgy & Mining > Flat & Rolled Metallic Materials

In the standard sizes given below:

Grades CK 67 / SAE1075 / CK 75 / C 75 / C 80

Surface Finish: GREY (unpolished furnace Grey) & Blue Polished

Edges: Both Edges ROUND

Hardness: 42~45 / 46 ~ 48 HRC / 47 ~ 49 HRC or as desired by the user.

1.00mm X 40 / 45 / 50 / 55 / 60mm

1.20mm X 40 / 45 / 50 / 55 / 60mm

1.30mm X 40 / 45 / 50 / 55 / 60mm 

1.40mm X 40 / 45 / 50 / 55 / 60mm

1.50mm X 40 / 45 / 50 / 55 / 60mm

1.60mm X 40 / 45 / 50 / 55 / 60mm

1.00mm X 25mm

Length: - 2 M to 7 M as desired by user

The sizes other than mentioned above can also be produced against specific orders.

The Springs are supplied with proper marking of its "Length" or may be marked with a specific Number if required on the Box.

These are packed in Neutral Packing in a set of 10 Pieces in an individual corrugated box.

A set of these individual boxes is then kept in a bigger box and such boxes are strapped on a Metallic Pallet tied with Steel Strapping for safe delivery. Suitable for your in house use or for direct trading at your end.

Hope you will find our manufacturing range in line with your market requirements.

We would look forward to receive your valued enquiries.

THANKING YOU,

WITH BEST REGARDS

VIJAY AJMERA

Asst. Manager (Cust Care & Vendor Dev)

Anil Special Steel Industries Limited,
Kanakpura, P.O. Meenawala, Jaipur -302012

(RAJASTHAN) INDIA.
Phone: +91-141-2470211,12,15,2352013,2470014
Domestic: +91-141-3234345(Direct)

Export: +91-141-2171325 (Direct)

Fax: +91-141-2470299,2470863
Email Id: vijayajmera@anilspecialsteel.com

Website:www.anilspecialsteel.com