|Origin:||Made In China|
|Category:||Electronics & Electricity / Telecommunication & Broadcasting / Network Communications Equipment|
|Label:||industrial , switch|
BDCOM IES series are multiservice managed industrial Ethernet switches. The series of products adopt a well-compatible network standard as well as the widely used, transparent and unified TCP/IP protocol, and follow the main industrial standards in industry control field. BDCOM IES has shown its vigorous vitality in demanding industrial environment such as high real-time communication, high network security, wide-range temperature adaptation, electromagnetic interference prevention and so on, for some industry-friendly components are adopted. Besides providing a sound network security system, BDCOM IES can be used to build a redundancy network for each one can automatically judge the shortest transmission path and the standby path, a requirement for rapid redundancy. Thus it is widely applied in automation lines such as power, transport and energy.
Tray Gigabit L2 IES IES210 Properties n Supporting BD EAPS (switchover time<50ms) and RSTP/STP (IEEE802.1w/d) n Flexible topology modes like ring, link, star and tangent ring n Supporting the port loopback protection function that effectively avoids the ring storm n Adopting the advanced heat cooling system that guarantees maximum heat cooling of internal devices without fans n Hi-standard sealing design, guaranteeing the normal running of devices even if in harsh environment or severe EMI disturbance n Flexibly configuring the level of input power and providing the redundant input of the DC power n Providing an alarm output port for relay and a function of out-of-power alarm n Supporting the automatic generation of layer-2 network topology and the centralized management Product’s Specification ★ Standard ports n 2 SFP gigabit optical/electrical Ethernet ports (not containing optical module) n 2 SC multi-mode, single-mode 15KM/40KM 1×9 optical interfaces n Six 10/100M Ethernet ports n One Console port, RJ45 ★ Technology n IEEE802.3、IEEE802.3u、IEEE802.3x、IEEE802.3ae、IEEE802.3z、IEEE802.3ab、IEEE802.3ad n IEEE802.1Q, IEEE802.1d, IEEE802.1s, IEEE802.1w, IEEE802.1x, IEEE802.1p, store-and-forward n 8.8Gbps backplane bandwidth and wire-speed L2 packet forwarding rate n Supporting powerful ACL and hardware L2 to L7 data filtration n MAC address table: 8K; 802.1Q VLAN:1-4094 n Supporting network clock protocols such as NTP, SNTP and PTP(IEEE1588) n Supporting flow control in full- or half-duplex mode and a 64K rate limits on the Ethernet interface n Automatically detecting and controlling broadcast storms, monitoring IGMP packets and effectively preventing broadcast packet's flooding n Supporting IGMP-Snooping and QoS (IEEE802.1P) ★ Network management n Automatically identifying the straight-through cable and the intercrossed cable n Adopting the cluster technology; supporting device cascading; managing uniquely through a unique IP address; saving address resources n Supporting multiple management modes such as Console port, Telnet, Web and SNMP n Supporting multiple general network management protocols like Broad Drictor, HP Open View and Cisco Works 2000 n Providing an alarm output port for relay and a function of out-of-power alarm ★ Power source n Supporting dual power input; input voltage: 24VDC(18～36VDC), 48VDC(36～72VDC), 110VDC(82～185VDC) or 220VAC/DC(85～264VAC/120～370VDC); power redundancy n Input current: 1.2 A; power consumption < 11W n Two 3-pin power input columns n Providing the protection to power overload and verso connection n Complying the level-4 standard of electromagnetic compatibility ★ Mechanical structure n Protection level: IP40 n Non-fan cooling design for the rib-shaped aluminum chassis n Standard guide-mode DIN installation n Power redundancy input; Direct current and alternative current being available n Size of chassis (W*H*D): 150mm × 150mm × 75mm ★ Line and cable n Double-twisted line: 0～100m (standard CAT5 or CAT5e cable) n Multi-mode optical fiber: 1310nm, 0～5km (100M); 1310nm, 0～2km (1000M) n Single-mode optical fiber: 1310nm, 0～40km；1550nm, 0～80km ★ Environment n Working temperature: -40℃～85℃ n Storage temperature: -40℃～85℃ n Relative humidity range: 5℃～95℃, no condensation n MTBF:20 years Criteria n IEC61000-4-2(ESD)：±8kV contact discharge, ±15kV air discharge n IEC61000-4-3(RS)：10V/m n IEC61000-4-4(EFT)：power line: ±4kV; data line: ±2kV n IEC61000-4-5(Surge): power line: ±4kV CM/±2kV DM; data line: ±2kV n IEC61000-4-6(RFI): 10V 0.5-80MHz n FCC CFR47 Part 15/EN55022: Class A & B (under authentication) n IEC61000-6-2(general industrial criteria), IEC61850-3(transformer substation), IEEE1613(power substation)，EN50121-4(rail transport)
|Payment Terms:||TT, LC|