Model: | F2603 |
---|---|
Brand: | Four-faith |
Origin: | Made In China |
Category: | Electronics & Electricity / Telecommunication & Broadcasting / Network Communications Equipment |
Label: | EVDO IP MODEM , EVDO dtu , IP MODEM |
Price: |
US $1
/ pcs
|
Min. Order: | 1 pcs |
Live Chat: | Last Online:19 Jul, 2013 |
F2603 CDMA2000 1X EVDO IP MODEM is a kind of cellular terminal device that provides data transfer function by public EVDO network.
It adopts high-powered industrial 16/32 bits CPU and embedded real time operating system. It supports RS232 and RS485 (or RS422) port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial devices with only basic configuration.
It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on..
Design for Industrial Application
u High-powered industrial cellular module
u High-powered industrial 16/32 bits CPU
u Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)
u Housing: iron, providing IP30 protection.
u Power range: DC 5~35V
Stability and Reliability
u Support hardware and software WDT
u Support auto recovery mechanism, including online detect, auto redial when offline to make it always online
u Support several work modes
u RS232/RS485/RS422 port: 15KV ESD protection
u SIM/UIM port: 15KV ESD protection
u Power port: reverse-voltage and overvoltage protection
u Antenna port: lightning protection(optional)
Standard and Convenience
u Support standard RS232 and RS485(or RS422) port that can connect to serial devices directly
u Support intellectual mode, enter into communication state automatically when powered
u Provide management software for remote management
Support multi data centers and it can support 5
Product Specification -----------------------------------------------------------------------------------------------------------------
Cellular Specification
Item |
Content |
Cellular Module |
Industrial cellular module |
Standard and Band |
CDMA2000 1X EVDO Rev A 800MHz,800/1900MHz(optional), 450MHz (optional) CDMA2000 1X RTT, IS-95 A/B |
Bandwidth |
Download speed:3.1Mbps, upload speed:1.8Mbps |
TX power |
<23dBm |
RX sensitivity |
<-104dBm |
Hardware System
Item |
Content |
CPU |
Industrial 16/32 bits CPU |
FLASH |
1MB(Extendable) |
SRAM |
512KB(Extendable) |
Interface type
Item |
Content |
Serial |
1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5, 2 Parity: none, even, odd, space, mark Baud rate: 110~230400 bps |
Indicator |
“Power”, “ACT”, "Online” |
Antenna |
Standard SMA female interface, 50 ohm, lighting protection(optional) |
SIM/UIM |
Standard user card interface, support 1.8V/3V SIM/UIM card, 15KV ESD protection |
Power |
Standard 3-PIN power jack, reverse-voltage and over voltage protection |
|
Power supply
Item |
Content |
Standard Power |
DC 12V/0.5A |
Power range |
DC 5~35V |
Consumption |
<250mA (12V) |
Physical Characteristics
Item |
Content |
Housing |
Iron, providing IP30 protection |
Dimensions |
91x58.5x22 mm |
Weight |
205g |
Environmental Limits
Item |
Content |
Operating Temperature |
-25~+65ºC (-13~+149℉) |
Extended Operating Temperature |
-30~+75ºC (-22~+167℉) |
Storage Temperature |
-40~+85ºC (-40~+185℉) |
Operating Humidity |
95% ( unfreezing) |