Metal Dome Array With Plunger:
Product Introduction:
Best click feel and long time life cycles
Passed ISO9001:2008 SGS RoHS
Metal Dome Array With PlungerTechnical Parameter:
1:Salt and Fog Examination:v35+-2°C, 5+-0.1%, 48H.
2:Storage Temperature\ Humidity :-55~+85°C \ 0~+80%
3:Working Temp.: -20 to 45.
4.Scope of Elasticity:160gf
5.Travel:0.15+- 0.003mm
6.Feel:50%+-10%
7.life cycles:>1million 8.New products development time is very short,
we send sample within 12 hours after received mode pattern.9.Mould only take 1-2days, very short time, and clients will not bear any cost of development.10.Delivery time is short: normal delivery 1-2days, the first P/O 3-5days.
Plunger metal dome array/Rubber Glue Dome array/EMI printing Rubber Glue Dome arrayAdvantage :(1).EMI printing has been adopted on current Metal Dome switch, and the priority of EMI printing lies in controlling the impedance of printing surface below 1.0, which result in effect of prevention to Hertzian waves and electrometer, in this way, the tone can be dealt with on the surface.(2). With the infiltration of static the effect of protecting the loop happened.
(3). Manufacturing engineering can be more difficult compared withthe exist Metal Dome.
(4). Strong applicability to the changeable climate. R&J works very closely with its customers in order to insure the success of its projects.
Working on the customer's drawing, the Research and Development Department offers specific solutions that meet your needs.
Product Type:
1.Single Layer Dome arry;
2.Double Layer Dome arry;
3.EMI Printing Dome arry;
4.Rubber Glue Dome arry;
