Model: | YK |
---|---|
Brand: | A&L |
Origin: | Made In China |
Category: | Electronics & Electricity / Switch / Other Switches |
Label: | pressure switch , pressure controller |
Price: |
-
|
Min. Order: | - |
Live Chat: | Last Online:12 Aug, 2013 |
YK pressure controller series
Genera:
YK series pressure controller (also called pressure switch) is a more advanced mini controller in the world and
is researched and designed by using special material and process on the basis of absorbing and digesting technical
advantages of same kinds of product both at home and abroad. The properties of the product are reliable and its
installation and application are very convenient. It is wide used for heat pump, oil pump, gas pump, refrigeration set of
air-condition and equipment where needs to adjust medium pressure itself and pressure protection.
Principle of work:
When the lift of pressure to be controlled in the system is over the set value, the pressure in the system will drive
mini butterfly metallic film and produce instant displacement and push inch switch to off (or on) and take place over
voltage protection.When the pressure of medium to be controlled is low than the set value, the mini film sheet will be
jumped towards opposite direction and restore its original state and inch switch is off (or on) and take place
over voltage protection.
Characteristics of voltage(can be manufactured in accordance with the requirement of customer) Unit: (Mpa)
Kind
|
Type
|
Permitted voltage deviaction
|
air tightness voltage
|
High voltage
(Normally closed) |
YK-3.5/3.0
|
±0.15/±0.20
|
3.5
|
YK-3.3/2.4
|
±0.15/±0.20
|
||
YK-3.0/2.4
|
±0.15/±0.20
|
||
YK-2.8/2.2
|
±0.15/±0.20
|
||
YK-2.5/2.0
|
±0.15/±0.15
|
||
Low voltage
(Normally open) |
YK-0.15/0.30
|
±0.15/±0.05
|
1.5
|
YK-1.10/0.20
|
±0.15/±0.05
|
||
YK-0.05/0.15
|
±0.15/±0.05
|
Other main parameters(can be manufactured in accordance with the requirement of customer)
Rate current\Rate voltage(A)
|
PF
COSΦ |
AC
|
DC
|
||
125
|
250
|
0~36
|
|||
Without induction current
|
1
|
0.02~6
|
0.02~6
|
0.02~3
|
|
Induction current
|
Full load current
|
0.75
|
0.02~6
|
0.02~6
|
|
Start current
|
0.45
|
0.02~16
|
0.02~16
|
|
|
Contact mode
|
Single-pole single throw
|
||||
Contact resistance
|
|
||||
Insulation resistance
|
|
||||
Electric strength
|
|
||||
Structural structure
|
High voltage switch should undertake 10.5MPa and low voltage switch, 2.25
MPa for one minute, without crack or broken phenonmon |
||||
Applied temperature
|
-30oC~+100oC
|
||||
Useful life
|
Above100,000times
|