Home > Products > Transportation > Car Accessories > Car Safety Products

Detailed instructions：

TO prevent lost and replace your old remotes!
1. Self-learning remote control
2. Mainly apply to car alarms, home alarms, panic buttons, garage door, rolling curtain, etc.
3. Copy most radio fixed code remote controls
4. Learining face to face in few seconds
5. Battery included

Coding Mode: Fixed code
Frequency:  Adjustable from  250 to 480 MHZ (Default Setting)
Fixed frequency 315HMZ,433HMZ
Please inform me what frequency you need

Battery Model: 27A
Voltage: 12V

Chips of fix code type:
PT2240 PT2260
PT2262 EV1527
FP527 AX5326
PT2262 PT2242
HT600 HT680
HT6207 HT6010
HT6012 HT6014
AX5326-4 SMC5026
SMC5326-3 SMC5326-4
SMC918 SMC918-3
SMC918-4
etc.

Face to face Copy Remote Operation Manual
Remove factory code
Press the LOCK button and the UNLOCK button(picture one)at the same time.The LED light starts to flash 3 times.Then hold on the LOCK button, and press the OPEN button 3 times., and then the LED light flashes quickly.It means that the code has been remove.

Copy

The left hand holds the original remote, and the right hand holds the face to face copy remote. Let two remotes get closer as they can.( The best effect is to learn it shoulder to shoulder.)

Press the two LOCK buttons on the two remotes. Three seconds later,

 the LED light starts to flash 3 times, and then flashes quickly.

 It seems that the code of locking key on the original remote

is copied into our Remote Control Duplicators. So as the other 3 buttons.

Recovery
If you remove the code of remote control. You can both press the SOUND button and MUTE button.

the LED light starts to flash 3 times,

and then flashes quickly. It seems that the code of remote control duplicator has been recovered.

Frequency modulation

If it is fixed frequency, please press remote and try have a test. If it is adjutable frequence, just as 315MHz ,

you can use the same way above.If it isn’t 315MHz,

please use the none sense of adjustment rod to adjust to which frequency you need.

 The frequency can been adjusted from 280MHz to 490MHz.

If the remote is with decorative hardware,

please adjust down about 3MHz to eliminate the impact of hardware on the frequency.

For example, 315Mhz can adjust to 312MHz; 433MHz can adjust to 430MHz. As a result,

 the frequency will up to 315MHz or 433MHz after fix the metal shell.

face to face remote control ,no need the remote master to copy