Product Description
The truth is that high complexity PCBs with tiny components is a tendency. To follow such trend, Jet Technology launch JET-6000, a sophisticated and powerful solder paste inspection tester to check all the printing defects. It adopts RGB Tri-linear CCD which incorporated with 3-phases shifting algorithm for 3D profile measurement of solder paste. In addition, SPC reports provide sufficient information for printing process control.
Features
- Meet the most demanding cycle time requirements with 100% inspection
- Precise inspection by 3-phases shifting algorithm for height, area, volume, shift and bridging measurement of solder paste
- Easy and fast to recognize fiducial mark and program by teaching with partial Gerber file
- Easy to analyze defective pads by trend charts and numeric display
- Display overall trend of measurement results with color diagram to be feedback information for optimizing the screen printing.
- Good repeatability and reproducibility (GR&R <10%)
- Accurately inspection of all components with good repeatability for CSP with pads size as small as 8 mils
|
|
In time inspection data of height, area, volume and shrifts of solder paste.
|
Statistic Process Control
|
Specification
Dimensions (h x w x d) |
216 x 100 x 137 cm (78 x 39 x 54 in) |
Machine weight |
1200 kg (2600 lbs) |
Electric power |
AC 220~240 V, 50/60 Hz, 15 amps. |
Air pressure |
5 ~ 7 kgf/cm2 (70 ~ 100 psi) |
Conveyor speed (Left to Right or Right to Left) |
300 mm/sec (12 in/sec) |
Conveyor height (adjustable) |
890 ~ 965mm (35 ~ 38 in) |
Maximum inspection area |
500 x 450 mm (15 x 16 in) |
Minimum inspection area |
100 x 70 mm (4 x 2.75 in) |
Board thickness range |
0.5 ~ 5.0 mm (0.02 ~ 0.2 in) |
Board edge clearance |
top 2.5 mm (0.1 in) ,
bottom 3.8 mm (0.2 in) |
|
Features
Typical inspection speeds |
64 cm2/sec (9.94 in2/sec) |
Typical fiducial mark finding |
< 4 seconds |
X and Y pixel resolution |
20 microns (0.788 mils) |
Z axis (height) resolution |
1.225 microns (0.048 mils) |
Permitted maximum board warp |
< 2mm for each scan width 42 mm |
Paste height range |
50 ~ 450 micros (2~18 mils) |
Height Repeatability (3 sigma limit) |
CSP : 5 microns( 8 to 18 mils in diameter)
BGA & QFP : 3 microns( ≧ 20 mils in diameter) |
Height Repeatability (3 sigma limit) |
CSP : ± 7 %( 8 to 18 mils in diameter)
BGA & QFP : ± 3 %( ≧ 20 mils in diameter) |
Height Accuracy |
CSP : 8 microns( 8 to 18 mils in diameter)
BGA & QFP : 5 microns( ≧ 20 mils in diameter) |
|
Dimension
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,