Ceridust 9610 F wax
Product Description: Ceridust 9610 F is PTFE modified polyethylene wax powder, average particle size 8.5 microns. Since mixed
Combined with r ed polyethylene and Teflon smooth, Ceridust 9610 F can provide excellent abrasion resistance and smoothness.
Technical data:
Dropping point: about 125 ℃
Acid Value: 0 mg KOH / g
Density (200 C): about 0.99g/cm3
Particle size: d50 of approximately 8.5 microns
d90 about 15 microns
Color: White
Performance:
Ceridust 9610 F has the following features:
※ In the traditional solvent-based systems (industrial paint, printing iron coatings, coil coatings)
---- Improved scratch resistance and smoothness.
---- To prevent the product from sticking to improve slip resistance.
---- To prevent a hard object produced by a metal scratches.
※ In the powder coating lining:
---- Improved scratch resistance and smoothness.
---- To prevent the product from sticking to improve slip resistance.
---- Increase material in the spray device and the mobility of the catheter.
---- In the final product to resist dirt contamination.
How to use:
Ceridust 9610 F for acrylic, alkyd, polyurethane, nitrocellulose, epoxy, polyester and acid-curing resin coating system. Mixing, you can use a high shear mixer, such as a dissolver or a sand mill. Dosage depends on the system used and formulations. In traditional paint, the addition level of 0.8-2% of the total formula, in order to more fully wet wax particles, mixing for at least 15 minutes. In the low viscosity of the system, wax may be a settlement. However, the loose sediment is easily redispersed.
When used in powder coatings, Ceridust 9610 F First, all of the ingredients together with the other dry-blended, and then in an extruder or a kneader well mixed, add the amount should not exceed 1%.
Packaging and storage:
Ceridust 9610 F is 20 kg paper bags, and stored at room temperature in a dry.
This information is to provide a general description and application instructions. Therefore can not be regarded as a special product performance and application adaptability guarantee ownership of the products shall be respected and protected by the general conditions of sale of product quality assurance.
