Home > Products > Industrial Supplies > Construction Machine

1. Engine: Japanese Honda 13HP or Robin 13.5HP four-stroke air-cooled gasoline engine.road marking machine 2. Chassis: A firm welded frame; its surface has been chrome-plated or sprayed with corrosion resistant coating; equipped with imported high-speed bearing which ensures the whole machine lighter and more convenient. road marking machine3. Rubber wheel: The left and right back wheels are gas-filled pressure resistant vacuum wheels whose diameters are Ф350mm; the front directional wheel is special naturally modified rubber wheel with abrasion resistance whose diameter is Ф190mm. road marking machine4. Front wheel directional device: It can lock the front wheel to ensure the road-marking machine to operate freely in straight line or turning.road marking machine 5. Guide rod: The adjustable guide rod can be freely adjusted to up, down, left and right.road marking machine 6. Paint pump: Equipped with double new-type hydraulic plunger type high pressure airless pumps that runs stably with big flow and stable pressure. The Maximum pressure is 20mpa (working pressure 10-15mpa) with single pump maximum flow 12.5L/min. It can spray two colors of marking lines, double-real line, pedestrian crossing and airport double-color line synchronously. road marking machine7. Paint tank (optional): The capacity is 80Kg; equipped with a filter device in it and air in-take filter in the feeding port. road marking machine8. Spray gun: Equipped with three new-type manual spray guns with hard side columnar reverse washed nozzles (20/25 or 30/25) which can make the on-spot discharging easy and convenient; the non-arc nozzle ensures the line straight and exact. The hand brake controller makes the change among single, double or three spray guns flexibly. road marking machine9. Available paint: Cold solvent paint, water-based paint and two-component paint. road marking machine10. Spray width: 100-450mm.road marking machine 11. Size & Weight: 1750 mm(L)x 1000 mm(W)x 1070 mm(H),142kg( excluding the paint tank ).road marking machine Option for TT-XT-II Rool Booster for operator to realize automatic function. Type B equipped with air-compressor, glass beads pressurized bin, glass beads spray gun, and glass beads spray control system and stainless steel spray system to meet the needs of water paint construction. Except all the functions of type B, type C is equipped with a micro-electronic control system, which consists of micro-electronic controller, on-off coder, electromagnet, special gun bracket and so on. This system can set four kinds of marking modes according to the national road marking standard, and realize fully automatic control.road marking machine