Home > Products > Electronics & Electricity > Optical Fiber, Cable & Wire > Electric Wire & Cable

Erect Fiber Optic Splice Closure 1
  • Erect Fiber Optic Splice Closure 1

Erect Fiber Optic Splice Closure

Model:-
Brand:Lanbell
Origin:Made In China
Category:Electronics & Electricity / Optical Fiber, Cable & Wire / Electric Wire & Cable
Label:splice closure , splice box , fiber optic closure
Price: -
Min. Order:10 pc
Inquire Now Add to Basket

Member Information

Detail

Product Description

Erect Fiber Optic Splice Closure
Fiber Optic Splice Closure, Fiber Optic Closure, Fiber Optic Joint Box, FOSC
It is the most reliable FOSC with the simplest installation in the world. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; Therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation.
The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.
It ensures long-term reliability and usage under ambient temperature from -40 to +65 degree celsius
Purpose: Aerial, direct-burying, wall-mounting, Pipeline laying way
External dimensions:
465mm*188mm*120mm (Horizontal type)
500mm*250mm (Erect type)
Weight:
3kg(Horizontal type)
2.1kg(Erect type)
Structure: Open structure or Split Type (quick installation type)
Material: ABS or PC
Environmental temperature: -40 to +65 degree celsius
Atmospheric pressure: 70 to 106KPa
Optic property: The spare fiber coiled in the fiber emplacing device; The fiber connector won't attenuate during the FOSC installation operation period.
Seal Performance: After the closures are sealed, then pressurized up to 100KPa+-5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Re-encapsulation Performance: The closures are pressurized up to 100KPa+-5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
Maximum capacity: 144cores
Span-life: 25 years.
It is widely used for communication, network system, cabled T. V. Of CATV, the fiber optic cable by network
Uses and properties:
It is belonged to open structure airproof tie-in system of machine pressure.
It is used for the protective connection between two or more optical cables
Suitable for single core fiber optic cable and ribbon fiber optic cable
Main Technical Indexes:
1. Airproof performance: Airing pressure inside box 100Kpa, pointer immovability after 24 hours or no air bell within 15min when parked in the common temperature water.
2. Re-encapsulation performance: No change in the index of air-proof performance after three times of repeat encapsulation

 


Product Image

Erect Fiber Optic Splice Closure 1
Img 1

Send Inquiry to this Member

Changzhou Bell Data Communication Equipments Co.,Ltd

15A Zhongnan building,NO.33Guanhe west road,Changzhou,Jiangsu,China

Phone:
86-519-86809961
Fax:
86-519-86809967
Contact:
daisy (sales manager)
Mobile:

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Electric Wire & Cable Made In China Products

,  

Electric Wire & Cable China Suppliers and China Manufacturers