information about PS2 HEAVY DUTY
1. Illustration of PS2 main unit
A. Front-View
B. Back- view
C. Illustration of the various connect points on top of the main unit:
① Power switch: For powering the main unit on and off
② USB connection: Used for connecting to a laptop or pc to view data
③ VGA connection: Used for connecting to an external monitor (800×600 pixels)
④ Main port connection: Connects main unit to vehicle diagnostic port
⑤ power connection: Used for an external power supply
⑥ Touch screen pen: Used for touch screen
D. Illustration of the various connect points on bottom of the main unit:
①serial port: Uses in the main body deb ing.
②SD card slot: uses for SD card
③ paper outlet: use for mini printer
E. Function of VCI diagnostic box:
The VCI box communicates with PS2 mainframe and vehicle. It is also called lower-position machine box. This diagnostic box has two connections: DB15 and OBD II. The main testing line connects PS2 mainframe with DB15. The OBDII connection could link with the testing adapter (vehicle with OBDII adaptor could directly link with PS2 mainframe)
PS2 mainframe with no main testing line also can do diagnosis as the bluetooth communication module has been installed into the VCI diagnosis box. Please change the setting from “on-line diagnosis” to the “wireless diagnosis” on the menu if you are wondering to use it with wireless!
F. Using the multi-jumper box
Tip: If you use the OBD testing connectors for direct connection, can only detect the standard diagnostic connector pin out on the connected system (pin 7 for ISO diagnosis, pins 2 and 10 for SAE diagnosis, 6 and 14 pins for the CAN diagnosis). This is usually the engine control system, some cases may find other systems. All diagnostic criteria did not take out the plug pins on the OBD system must use the test connection with the 'million a jumper box' to the jumper connection test. In the use of 'million a jumper box' to the jumper connection test, click on that connection as follows:
⑴ the multi-jumper box with cables
① Ground
②power lines
③ signal lines
⑵ note of the side hole on multi-jumper box , it is visible on the label place of the box back
2. PS2 technical parameters:
① operating system: WINCE 5.0 operating platforms
② CPU: SAMSUNG 32 bits processors, basic frequency is 400MHZ random memory: SDRAM 64M
③programming memory: FLASH 64M ,supports SD card slot-in and slot-out
④mainframe battery: rechargeable battery 3500m/Ah
⑤mainframe power supply: DC12V/24V
⑥mainframe power: 25W
⑦printer: Mini high-speed thermal sensitive printer
⑧screen: 8 inches real-color touch-screens, 800×600 with LED back-light
⑨relative humidity: <90%, temperature: -20-50℃
⑩wireless communication: blue-teeth
3. Package parameters:
①machine composition: mainframe with SD card, touching pen, testing adapters, group of lines, SD card adaptor, operation manual and outside suitcase
②overall size: 305.2×215.2×85mm
③weight: 9KG
