Home > Products > Industrial Supplies > Plate Making & Printing Machine

The cutting structure adopts double pull rod and double worm gear electro-magnetic clutch, the worm wheel and worm are double-chromium ring surface rotation with large cutting power. The clamp adopts hydraulic structure and independent motor to rotate, the rotation is steady, the pressure could be adjusted.
　　It is more than 3 times, compare with the cutting power of common worm wheel and worm, and no noise.These are safety screw and safety switch installed on the double pull rod.
　　With different computer systems (M10, A15, A10 and F10) to choose.
1.Double linear guides,slotless working table
2.Main working table with chrome-plated and air cushion
3.Both side table with chrome-plated and air nozzles
4.Adopting imported ball lead screw
5.Double worm gears and double pull rods to offer big clamping pressure
6.Mechanical assistance device for knife replacement
7.Overloading protection satety device for cutting
8.Infrared photoelectric protection
9.Buttons by two hands safety devices
10.Main motor overloading protection for cutting
11.Japan NSK bearing of low maintenance
12.Import hydraulic components
13.Main electronic units are from French TE and Japanese ORMON brands
14.Total 2 knives
15.Illuminated working surface/optical cutting line indicator