Product Description
First, the name and purpose of each part
1, vertical pianos
Foot valve
Tap the left under the left pedal piano pedal, so playing the piano weakened.
Depress the middle muffler pedal pedal, push the left, is fixed at pianissimo state.
Push the pedal up, it will lift, and restitution. (Mallet percussion can carpet covered in felt with pianissimo strings, and to reduce the percussion force, reducing the volume)
The right sound system depress the right pedal pedal, will be released only sound equipment (sound system equipment), can be extended string vibration state, sparking not hit the string resonance.
2, grand piano
Foot valve
Tap the left piano pedal will change under the left pedal tone, volume.
Pedal tone in the middle of a long press of the keyboard state, depress the pedal, even lifting your finger, or the continuity of their sound and continue to echo.
The right sound system depress the right pedal pedal, will be released only sound equipment (sound system equipment), can be extended string vibration state, sparking not hit the string resonance.
Second, the switching operation of the order grand piano cover
Cover the switch must be operated by an adult. Open the lid only when
1, set off with both hands to cover up to the turn after. (The cover on the top plate above)
Need to cover and open at the same time on the board
2, according to a board placed on the shelters opened up with both hands.
3, opened with one hand shore of the board, with the other hand stand on the board inside the tip inserted in the fulcrum.
2 on the board inside the fulcrum, the medial pivot point, the insert length of the stent; lateral pivot in, insert a short frame.
If you stand off from the fulcrum on the board, the board easy to fall off, so should the central pivot bracket is inserted.
Caps in the order in accordance with the open ends can operate in reverse order.
Third, the grand piano music stand of the operation sequence
Need support from the music stand
1, both hands to hold the bar music stand, music stand pull forward until the score board from the bottom of the lid completely out of date.
2, holding the score board on the inside or the side, put up spectrum plate. Angle can be adjusted to 3 files.
3, according to need both hands holding the bar to re-adjust the score sheet before and after the position.
Fourth, how to make better use of the piano
In order to use the piano in the best condition
1, piano tuner technician, regular tuning and adjustment.
2, keep a good family environment.
3, the correct use and maintenance is very important. Regarding the acquisition and adjustment after test
When you purchase the piano, agents will be delivered to your door, and sent technicians to carry out the following work.
1, testing the performance of the piano.
2, on the piano for tuning and adjustment.
3, to provide maintenance, management and service related information.
Fifth, how to choose the best settings place the piano
Of the management and use of the piano notes
1, on the piano for the environment
In the family, the piano most of the problems is caused by excessive humidity. Humidity is too large, too dry, and sharp difference in temperature, will cause adverse effects on the piano.
2, set the vertical piano, please contact the wall isolation.
And the isolation wall 10 ~ 15cm appropriate. So that good ventilation can also help the spread of piano.
3, do not put in place a long time there is direct sunlight
A painted surface discoloration, deterioration and the components of the deformation, cracks cause of the problem.
4, do not put it prone to rapid temperature and humidity place
⑴ breathed easily cause the oxidation of metal parts.
⑵ by changes in components, easy to cause mixing of the disorder.
⑶ as the aging of the paint surface, part of the deformation, cracks.
5, do not put it where dust or humidity
⑴ be flexible keyboard is not the reason.
⑵ felt hammer inhalation moisture, adverse effect on the sound of the piano.
⑶ strings and other metal parts rust easily.
6, not too dry or placed in a place away from heat sources near
⑴ screw loose parts to assemble, a noise reasons.
⑵ as the aging of the paint surface, part of the deformation, cracks.
⑶ as the maintenance of parts of the relaxation and easy tuning of the damage caused.
⑷ induced contraction of wood or felt shall impede the normal play.
1, insecticides or volatile items, please do not put on top of the piano
(Household paints, adhesives or pesticides, benzene, perfume, all-purpose adhesive, eruption styling agent, whiskey, nail polish, etc.) into the paint surface discoloration, bad reasons.
2, Please do not operate within the internal parts or modify
(Piano, many need to adjust the internal parts. Free to operate or modified will cause damage or loss of its function.)
3, please do not use alcohol, benzene or other detergent keyboard
(A keyboard deterioration, cracks.)
4 drops of paint on the surface, do not use strong tape or liquid food
(Ice juice, drinks, chewing gum, transparent plastic, adhesive tape, etc.)
Easily lead to the shedding of the paint surface
5, do not put the piano top with water (flower vases, cups, etc.) containers
Water (moisture) is the enemy of the piano. If the water on the piano top, easy to damage the performance of the piano.
6, note piano keyboard within the gap do not throw foreign objects (paper clips, coins, buttons, hair clips, pencils, erasers, mini toys, etc.) into the keyboard will not operate or produce noise reasons.
Product Image
Img 1
Img 2
Img 3
Img 4
Img 5
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
