Home > Products > Security & Protection > Surveillance Equipment

CCTV Tester Optical Power Meter
Function & Characteristic.
Optical Power Meter and Digital Multimeter,3.5"TFT-LCD , 960(H)×240(V) resolution.DC12V 1A power output for camera,Video Generating, The PAL/NTSC multi-system colorbar video generator (seven-system switchable, transmit/receive seven-system colorful imagines).Data analyst. Captures and analyzes RS485 controlling data to help the technician to find out the problem.

Application     CCTV system installation and maintenance     Dome camera and All in one camera testing     The CCTV transmitting channel testing     PTZ controller   Features        3.5"TFT-LCD , 960(H)×240(V)resolution.        DC12V 1A power output for camera        Audio input test        PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and sets and calls the preset position        Video displaying. Automatically adapts and displays the video format of NTSC/PAL.   LCD Brightness/Contrast/Color Saturation are adjustable.        Video Generating, The PAL/NTSC multi-system colorbar video generator (seven-system switchable, transmit/receive seven-system colorful imagines)        Data analyst. Captures and analyzes RS485 controlling data to help the technician to find out the problem.        Cable testing. It is powerful in testing LAN cable, measuring the connecting status ,displaying the sequence of connection and the NO. of the LAN cable.        Multi-interface and Multi-baud rate. Support RS232 ,RS485 and RS422 interface; baud rate ranging from 150, 600 to 19200bps.        Multi-protocol. Supports more than twenty PTZ protocols. For example, PELCO-P, PELCO-D, SAMSUNG etc.        Lithium Ion Polymer Battery (3.7V DC3000mAh). The device employsadvanced power control and protection circuit. The device is high power-efficient, energy saving and environmental protection. It can last 12 hours for normal use after charging for 4 hours.        Digital Multimeter performs AD/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance and Diode test, Auto / Manual Range, Data hold, Relative measuring.        The Fiber Optical Power Meter to measure the power of Video Fiber Optic Transmission equipment, and testing the Fiber Optic Patch Cord, etc. MODEL HS-CVT13 Video Test Signal mode NTSC/PAL (Auto adapt) Display 3.5 inch digital TFT-LCD ,960 x 240 resolution LCD adjustment Brightness, Contrast, Saturation adjustable Video IN/OUT 1 channel BNC Input & 1 channel Output Video Output Mode 1.0 Vp-p PTZ controller Communication RS232, RS422 simplex and RS485 PTZ Protocol Compatible with more than 20 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc. Baud Rate 150,300,600,1200,2400,4800,9600,19200bps Video Signal Generation Color bar generation Output channel colorbar video signal for testing monitor or video cable UTP CABLE TEST UTP cable test Test UTP cable connection status and display in the screen. Read the number of the test box. DC12V 1A power output DC12V power output  Output DC12V1A power for camera Audio input test Audio input test test the pickup and other audio equipments on the front-end RS485 data analyst Data Monitor Captures and analyzes the command data from controlling device Optical Power Meter Wavelength 850, 1300, 1310, 1490, 1550, 1625nm Detector InGaAs Linker FC/PC(SC, ST) Measurement Range -70~+10dBm Display Resolution 0.01dB Digital Multimeter Reading range -6600~+6600 AC/DC Voltage 0-600V Auto/Manual ranging, 0.1mV resolution AC/DC Current 6.6mA, 66mA, 660mA, 10A Manual ranging Resistor 660, 6.6K, 66K, 660K, 6.6M, 66MΩ auto/manual range Continuity Built-in buzzer will sound, if resistance is lower than 50Ω Diode 2.0V Range, 1mV resolution Capacitor 6600pF~66,000μF auto/manual range POWER Power Adapter DC5V, 2A Battery Built-in 3.7V Lithium polymer battery ,3000mAh Rechargeable After charging 3-4 hour, working time lasts 12 hours Low Consumption Energy saving technology General Working Temperature -10℃---+50℃ Working Humidity 30%-90% Dimension 176mmx94mmx36mm