Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Other Communication Equipment

Central Pressurized Polisher

1. Overview
 Automatic central pressurized polisher use industry-specific microcomputer development and into. Set motor speed, time and count in an organic whole, improve the stability of the machine. Adopting advanced technology.
 
2. Basic function:
 Working voltage
Machine working voltage: AC220V.
 Stepless speed regulating
Buttons speed adjustment, speed range:0n/m~200n/m,Each time you press the speed control key speed.
 Automatic fixed time
Timing function with the countdown display. Timer time to the machine, time up automatic stop working.
 Automatic count
Each time you press the button, the counter automatically increase 1 times, used to grind paper used times of memory.
3.Product introduction:
Can  manufacture various standard optical fiber connectors: FC/UPC, SC/UPC, ST/UPC, LC/UPC, MU/UPC, FC/APC, SC/APC, MT - RJ, E2000 etc various types of optical fiber connectors should may at any time storage, edit pressure and time parameters
Compression, unload and changing the fixture, grinding slice conveniently
Processing quality stable, it has low rate of repair
High efficiency (countable sets of production line)
Consumables save, grinding cost is low
Grinding speed can be adjustedfrom0 to 200rpm
Can grind to other similar products
4.Main parameter:
1. Polishing chassis diameter:112mm
2. Polishing chassis beating:≤5um
3. Machine net weigh:28KG
4. Machine size:450L*220W*500H
5. Polishing time setting:0~999.99s
6. Counterweight pressure:2.1~3.6kgf/cm
5. Equipment parts name
1. The power switch: control the machine the opening/closing.
2. Start switch: control the machine operation.
3. Insurance (FUSE) : insurance specifications for: 250V / 0.5 A.
4 governor: to adjust motor speed, in order to satisfy the needs of different materials for grinding.
5. Open and close button: press "1" button, the equipment running, press the" o" button, equipment stop working.
6. Timer: setting and display the polishing time
7. Counter: record grinding number, if want to recount, can press the reset button.
8. Heavy hammer: adjust heavy hammer position, adjustable grinding pressure, a total of three different gear is available.
9. Compaction pin: the pressure in the center, to grind fixture grinding fixture put some pressure.
10. Prevent turn pin: insert in jig anti turn groove, prevent grind chassis rotation.