1)Single pole electronic key card switch with 15 seconds turn off time delay
2)Voltage:90v--130v; 190v-240v
3)Several standard
1)The switches enable or disable power to electric circuits and loads inside a guestroom when the room is vacant
2)Hotel card key switch with 15 seconds turn off time delay
3)Dimension: 86mmx86mmx42mm
Mounting Hole dimension: 60.3mm
4)Voltage: 90v--130v ; 190v-240v
5)Modularized frame style design, easy for use and flexible, energy saving
6)Any card for power / RF card for power / Mifare one card for power.
7)European standard, British standard, U.S standard hotel card key switch to meet different country standard.
8)Competitve price
SPEEDKEY hotel card key switch is the one-of-a-kind switch activated by hotel key cards and turns electrical circuits on or off when a key card is inserted or removed from its slot.Energy-efficient hotel card key switch, helping the hospitality industry reduce energy consumption in empty hotel rooms.
When a guest enters a room, they insert the key card into a docking station. After the key card is inserted, infrared signal is obstructed or RF contactor/non-contactor is activated subsequently "energizes" the hotel guest room. When the key card is removed from its dock, the controlled circuits will have power for another 15 seconds to allow safe egress from the room before power is turned off. (lights, kettles, etc.). To restore power to the rooms controlled circuits; reinsert the hotel key card into the card key switch. While your guests are away from their rooms theyre actually saving you valuable energy, thereby reducing your energy bill.
Hotel card key Energy Management Systems allow Guests to control the energy in their room through inserting their key card. This assures that when guests are not in their room, energy will not be wasted on lights or appliances left on.
By reducing the amount of energy exhausted on lighting, heating and cooling unoccupied rooms, with hotel card key switch, hotel owners can reduce energy consumption up to 30 percent. When factoring lower power bills, the hotel can recoup initial installation costs in less than four years. Architects and contractors can now modernize a hotel without running wires to the controls. No special wiring or networking expertise is required. The switch is easily programmed to the controller and the time delay can be adjusted in 15 seconds.
In a word, with Hotel Card key switch, facilities managers in the hospitality industry can easily comply with current energy save without compromising guest comfort and satisfaction.
As soon as a guest leaves his room and takes his hotel card out of the master switch, the desired electrical equipment is disconnected. Quite an effective method to avoid unnecessary power consumption.
