Model: | B25Ex |
---|---|
Brand: | Calsatr |
Origin: | Made In China |
Category: | Chemicals / Dyes & Pigment |
Label: | recovery unit , recovery equipment , purifier |
Price: |
US $4399
/ set
|
Min. Order: | 1 set |
Live Chat: | Last Online:10 Nov, 2017 |
B25Ex economical petroleum asphalt solvent recovery device
Product Introduction
B25Ex, specially designed solvent recovery device for small amount of organic solvent recovery. Double layers tank and water-cooled condensing system, safe structure are manufactured by Chinese explosion-proof standard (CNEX: Ex d IIB T2 Gb, certificate No. CNEx16.2113X) and European standard (ATEX). After distilling and cooling for proximate 2.5 hours, clean organic solvents will be ready for reuse.
It is suitable for small amount of organic solvent to recycle.
Product Photos
Detailed images
Technical data
Imput volume |
25 L |
Length |
587 mm |
Capacity of Tank |
40 L |
Width |
827 mm |
Capacity of heat transfer oil |
18 L |
Height |
1130 mm |
Power of heater |
3.0 KW |
Weight |
73 KG |
Max power |
3.1 KW |
Temp. of operation |
50~190 °C |
Max current |
14.1 A |
Ideal room temp. |
5~30 °C |
Power supply |
220V AC/50 HZ |
Noise |
around 50 db |
Recovery rate |
95% |
Voltage of control unit |
24V DC |
Heating method |
Indirect heating by heat transfer oil |
Cycle time |
around 2.5 Hours |
Flow of cooling water |
>120 L/H |
Cooling system |
Water-cooled |
Max pressure of Condenser |
30 Bar |
Temp. of cooling water |
25°C s ested |
Solvent imput |
Manual ( automatic imput unit is available) |
Operational Temp. of Condenser |
-160°C~+200°C |
Vacuum unit |
None(option addable) |
Material of case |
Carbon steel with paint, or SUS304 |
Material of tank |
SUS304, double layers |
NOTE: Values listed above are under ideal conditions in laboratory, just for your reference. The realistic data will be a little deviation due to the difference of waste content, boiling point of solvent, room temperature, viscosity etc.
Recoverable solvents list
1. Aromatics categories: toluene, xylene, mesitylene, etc.
2. Aliphatic hydrocarbons: pentane, hexane, octane, etc.
3. Alicyclic hydrocarbons : cyclohexane, cyclohexanone, toluene and cyclohexanone, etc.
4. Halogenated hydrocarbons: chlorobenzene, dichlorobenzene, methylene chloride, trichlorethylene, etc.
5. Alcohols: methanol, ethanol, isopropyl alcohol, etc.
6. Ether: ether, propylene oxide, etc.
7. Esters: methyl acetate, ethyl acetate, butyl acetate, etc.
8. Ketone: acetone, methyl ethyl ketone, methyl isobutyl ketone, etc.
9. As well as other organic solvents that are not listed.
Unrecoverable solvents list
1. Nitrocellulose (nitro), and oxidant solvents and other hazardous materials.
2. Strong acid or strong alkaline solvents.
3. Highly toxic solvents.
4. Pairs of stainless steel or brass with a strong corrosive solvent.
Main Features
● Explosion-proof design: in compliance with Chinese Explosion-proof standards (CNEX) and European standards (ATEX),
● Standardized production, stable and durable quality guaranteed.
● Tilting-type: gradually tilting and pouring out waste residue which is easily removed.
● SUS304 stainless steel tank is used to prevent chemical corrosion. Two layers design, reinforcement barrelhead design, precise temperature control, explosion-proof, anti-leakage are made for safer operation.
● Heating Method: heat medium (heat transfer oils) indirect heating.
● Digital heating temperature controller: advanced numerical display, accurate and convenient heating temperature control.
● Multiple operational safety protection functions: power off or power on by timing or temperature pre-set, excessive temperature protection features; high-voltage protection function; power failure protection function.
● Short reclaiming process, simple operation.
● Less maintenance.