Home > Products > Industrial Supplies > Textile Machinery Parts

YCSTM-JMF301 / M type compact spinning device  1
  • YCSTM-JMF301 / M type compact spinning device  1

YCSTM-JMF301 / M type compact spinning device

Model:YCSTM-JMF301/M
Brand:STM
Origin:Made In China
Category:Industrial Supplies / Textile Machinery Parts
Label: -
Price: -
Min. Order:-
Inquire Now Add to Basket

Member Information

Detail

Jiangsu Haima Textile Machinery Co.,LTD.

Free MemberJiang Su - China
Live Chat:Last Online:12 Dec, 2019

Product Description

 Product description

 


A, YCSTM-JMF301 series of compact spinning device performance characteristics


 


YCSTM-JMF301 series of compact spinning device for lattice apron compact spinning negative pressure airflow. Mainly by the tight tube combination part ( including tight tube, wear plate, tight tube tension shaft supporting plate, tension shaft, the grid ring ), beautiful roller combination ( including roller box, the bridge gears and a small shaft, toothed roller assembly ), tight tube positioning base combined part (including the Luo La sliding seat, bracket left right, plate, locking wrench, a round pin, spring washer ), the branch wind pipe combination, the main air duct combination piece and rear bellows combination and inverter control system.


 


The device not only has the conventional ring spinning machine basic property, also incorporates currently on the market all the forms of the grid ring type compact spinning device has the advantage, and improved after optimization, research and development, the structure has the following characteristics:


 


1, drawing close unit can be realized easily detachable, general spinning and compacts spinning to easily switch between. Once the order was reduced when the compacts spinning , spinning ring spinning can be ordinary. According to investigation and statistics, there are currently some enterprises lack of orders down compact spinning is restricted to produce, and can not be converted into ordinary ring spinning production, resulting in idle equipment;


 


2, the negative pressure unit using the central air duct in a negative - pressure form, main channel and the branch wind pipe, close pipe shortened, improve negative pressure ventilation efficiency, reduces the negative pressure fan load and actual power, beneficial to reducing energy consumption;


 


3, tight tube adopts double suction form, a deflection type negative pressure balance, increase the ventilation quantity, pressure air flow more smoothly, greatly reduce the negative pressure, spindle difference, in favor of yarn index consistency;


 


4, the main negative pressure bellows installed inside the wiper type linter cleaning device, realize long time spinning negative pressure stabilization, is different from other production companies for compact spinning device screen once linter closely rise, affect the overall negative values, thus affecting the overall close effect. The device is especially in the spinning of more than 80 varieties, more obvious advantages;


 


5, the main negative pressure bellows installed inside the circulating type linter collection device, realize long time spinning without opening when the bellows cleaning of short fiber and cotton waste, improve the running safety of the equipment performance, reduce equipment daily cleaning workload, reduces workers and cleaners, maintenance worker 's labor intensity and workload;


 


6, equipped with our company developed since the anti-blocking, anti winding, non-stick flower, self cleaning function of novel structure grid, grid ring surface is not integrable flowers every day, can reduce the net ring cleaning check workload, is conducive to the spinning quality more stable, good consistency;


 


7, the negative pressure fan using the domestic excellent wind turbine manufacturers Jiang yin fine Asian volute type fan, the negative pressure is maintained a considerable amount of cases, motor power by the commonly used 5.5KW, instead of 4KW, obvious energy saving effect, is helpful for the enterprise to realize energy saving, emission reduction, low carbon, high performance, in line with the national energy policy;


 


In 8, the machine in the transformation, at the same time according to user need for suction fan dress up transformation (extra).


 


In two, YCSTM-JMF301 series of compact spinning device structure


 


In 1, the roller drives the transmission grid ring transmission -- former Luo La through a special Luo La in the box before the drafting top roller with teeth, gear idle, toothed roller, and the toothed roller drives the grid ring around the tight tube relative sliding; at the same time the clamping roller and the grid ring between the yarn after close area close, enter the twisting zone.


 


2, look from the structure, compact spinning device adopts three Luo La drawing. Its main features:


 


(1) the system modular design, relatively simple structure, installation, maintenance of relatively simple. In six pounds as a unit, only the FA503 type ring spinning machine of the original Luo La seat mounted with special tight tube positioning seat combination, can be installed directly.


 


(2) negative pressure system uses the main duct, the branch wind pipe, rear bellows general fan and frequency control technology. Through reasonable duct and duct design, so that the front and rear of the negative pressure difference control in small range. At the same time, according to the production of yarn and fiber differential, flexible choice of different process of negative pressure, in order to achieve the best results.


 


(3) of the grid ring tension with weight single tension rod form, has the advantages of simple structure, uniform tension, won't appear deviation and grid ring is rolled the worst. At the same time, but also can eliminate the static grid ring, ensure close effect.


 


3, top roller and the tight tube assembly contact points in the tight tube with ceramic strip, strip can be replaced when it is worn, and the cost is low; thus greatly increases the service life of the tube tightly.


 


4, yarn quality


 


The same conditions (roving, technology, environmental) and conventional ring spinning contrast:


 


(1) over 3mm ( including 3mm) hairiness reduction of more than 65%;


 


(2) single yarn breaking strength increased by 15 ~ 25%;


 


(3) a dry Cv% is obviously better than the original ring spinning level;


 


Product specifications : 1, three Luo La type


 


2, negative - pressure type


 


3, a central negative pressure main air duct


 


4, the unique design of the branch wind pipe


 


The 5 single, double suction hole agglomeration tube condensing groove


 


Products advantages : 1, drive mode adopts roller drives the grid ring transmission -- former Luo La through a special Luo La in the box before the drafting top roller with teeth, gear idle, toothed roller, and the toothed roller drives the grid ring around the tight tube relative sliding; at the same time the clamping roller and the grid ring between the yarn through tight areas close, enter the twisting zone.


 


2, look from the structure, compact spinning device adopts three Luo La drawing. Its main features:


 


(1) the system modular design, relatively simple structure, installation, maintenance of relatively simple. In six pounds as a unit, only the FA503 type ring spinning machine of the original Luo La seat mounted with special tight tube positioning seat combination, can be installed directly.


 


(2) negative pressure system uses the main duct, the branch wind pipe, rear bellows general fan and frequency control technology. Through reasonable duct and duct design, so that the front and rear of the negative pressure difference control in small range. At the same time, according to the production of yarn and fiber differential, flexible choice of different process of negative pressure, in order to achieve the best results.


 


(3) of the grid ring tension with weight single tension rod form, has the advantages of simple structure, uniform tension, won't appear deviation and grid ring is rolled the worst. At the same time, but also can eliminate the static grid ring, ensure close effect.


 


3, top roller and the tight tube assembly contact points in the tight tube with ceramic strip, strip can be replaced when it is worn, and the cost is low; thus greatly increases the service life of the tube tightly.


specifications:Product specifications : 1, three Luo La type

2, negative - pressure type

3, a central negative pressure main air duct

4, the unique design of the branch wind pipe

5 single, double suction hole agglomeration tube condensing groove
Advantages:Products advantages : 1, drive mode adopts roller drives the grid ring transmission -- former Luo La through a special Luo La in the box before the drafting top roller with teeth, gear idle, toothed roller, and the toothed roller drives the grid ring around the tight tube relative sliding; at the same time the clamping roller and the grid ring between the yarn through tight areas close, enter the twisting zone.

2, look from the structure, compact spinning device adopts three Luo La drawing. Its main features:

(1) the system modular design, relatively simple structure, installation, maintenance of relatively simple. In six pounds as a unit, only the FA503 type ring spinning machine of the original Luo La seat mounted with special tight tube positioning seat combination, can be installed directly.

(2) negative pressure system uses the main duct, the branch wind pipe, rear bellows general fan and frequency control technology. Through reasonable duct and duct design, so that the front and rear of the negative pressure difference control in small range. At the same time, according to the production of yarn and fiber differential, flexible choice of different process of negative pressure, in order to achieve the best results.

(3) of the grid ring tension with weight single tension rod form, has the advantages of simple structure, uniform tension, won't appear deviation and grid ring is rolled the worst. At the same time, but also can eliminate the static grid ring, ensure close effect.

3, top roller and the tight tube assembly contact points in the tight tube with ceramic strip, strip can be replaced when it is worn, and the cost is low; thus greatly increases the service life of the tube tightly.

4, yarn quality

The same conditions ( roving, technology, environmental ) and conventional ring spinning contrast:

(1) over 3mm ( including 3mm) hairiness reduction of more than 65%;

(2) single yarn breaking strength increased by 15 ~ 25%;

(3) a dry Cv% is obviously better than the original ring spinning level

Product Image

YCSTM-JMF301 / M type compact spinning device  1
Img 1

Send Inquiry to this Member

Jiangsu Haima Textile Machinery Co.,LTD.

11 Taihu Road Tinghu District, Yancheng City,224051,jiangsu,China

Phone:
86-515-88601988 88600515
Fax:
86-515-88605959
Contact:
MRS.LU (Sales@ycstm.net)
Mobile:
086-139-05104155

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Textile Machinery Parts Made In China Products

,  

Textile Machinery Parts China Suppliers and China Manufacturers