Home > Products > Toys > Model Toys

NINJA 400 is suitable for the beginner and expert due to the small body can fly 3D and rolling, dive,   
    inversed flying perfectly, With the import aluminum alloy and 3K silver fiberglass body, NINJA 400 can be
    ensured to fly with maximum performance. Its CNC rotor head parts allow any 3D flight maneuvers. Also its
    design depends on handiness combining with modern electrical components technology.What's more,our
    NINJA 400 is equipped with 7 channel computer radio controls that support 120 degree of CCPM  
    operation .       
           NINJA 400 will bring you endless pleasant surprise , it can bring you happy, exciting, adventurous
    3D flying experience.      

RC model helicopter-Ninja400
NINJA 400 6CH RTF Brushless version belt driver 2.4G .NINJA 400 is suitable for the beginner and expert due to the small body can fly 3D and rolling, dive, inversed flying perfectly, With the import aluminum alloy and 3K silver fiberglass body, NINJA 400 can be ensured to fly with maximum performance. Its CNC rotor head parts allow any 3D flight maneuvers. Also its design depends on handiness combining with modern electrical components technology.What's more,our NINJA 400 is equipped with 7 channel computer radio controls that support 120 degree of CCPM operation .

NINJA 400 will bring you endless pleasant surprise , it can bring you happy, exciting, adventurous 3D flying experience.

Product included:
NINJA 400 helicopter ; 25A brushless controller ; SKY-500 Head Lock 3D Gyro ;four servos; 4500KV brushless motor ; SKY 703 2.4GHz 7ch TX/RX;11.1V 1100mAh LI-PO battery and balance charger;Color fiber canopy

Feature:
7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New radio control set

High Performace 4500KV Outrunner Brushless Motor used as the main drive and makes the flight much stable and better performace

Can fly in skyway, backward, and 3D aerobatic

120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced

Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing

Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds

The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage

Brand new design for the structure

Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying

Tail rotor driven by belt provide stable flight and low noise

NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-Helicopter

With length-adjustable servo push-rod, precision sub trim can be easily set

No need to worry about burning tail motors

Separate main shaft and main gear reduce repair time and noise

Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the load of whole helicopter

Easy to fly and more stable lifting

11.1V 1100mAh high capacitance Li-Po battery provide enough power for any aerobatic flight

Provide excellent performance outdoor and indoor

Tail blade adopt flameout landing system

Newly Designed Rotor Head gives better control and easy to install Extreme smooth control and stable flight

Precise controlling and hovering

Suitable for Indoor/Outdoor/Backyard/Stadium

Using the Ultra tough Firberglass materials, which is extremely light and not easily break ,the helicopter does have very strong structure.

Approximately 15 minutes flight time on each charge - 7Optional Li- poly battery will help to achieve better performance and longer flight time.

Best choice for Beginner - Advanced hobbyist

Specification:
main rotor diameter: 580mm
main motor type: BL 4500kv
main body length: 550mm
Average flight time: app:10min
Flight Weight : 440g
Battery type : 11.1V 1100mAh LIPO
Radio system : 7ch 2.4G
Main Rotor RPM: 3000