Home > Products > Industrial Supplies > Environment Protection Facilities > Sewerage

Micropore Aerator 1Micropore Aerator 2Micropore Aerator 3Micropore Aerator 4
  • Micropore Aerator 1
  • Micropore Aerator 2
  • Micropore Aerator 3
  • Micropore Aerator 4

Micropore Aerator

Model:D215,260
Brand:Waterpower
Origin:Made In China
Category:Industrial Supplies / Environment Protection Facilities / Sewerage
Label:Micropore Aerator , Aerator , waste water treatmen
Price: US $3 / pc
Min. Order:1 pc
Inquire Now Add to Basket

Member Information

Detail

Product Description

 

Membrane Type Micro-Pore aerator:
 
1.        The gas diffusion rubber plates of the aerator are made of the high quality synthetic rubber; the diameters of the diffused gas bubbles by the rubbermembrane are small, the area of the gas-liquid interface is big; so the aerator has the higher masstransfer speed and oxygen-charging efficiency. Comparing with other existing aerators, it can greatly reduce the power-consuming and the waste-water treatment cost.
2.        There are a lot of the self –closing pores in the rubber membrance; the pores can automatically open and close along with the oxygen-charging and operation –stop; so there is no pore –blockage or contamination. And , the air which enters into the aerator do not need the dust removal puritication; when the aeration tank stops the operation, the sewagemixture will not flush back; these will reduce a lot of the operation cost and the maintenance workload.
3.        As the membrane type micro-pore aerator can be successively arranged on the bottom of the aeration tank, the oxygen can be dissolved uniformly in the tank; the aerator can be used in all tank sand heights; and the aerator can also be used to renovate the existing aeration tanks , the efficiency of there novated aeration tanks can be improved.
4.        As the gas diffusion plates of the membrane type micro-pore aerator are made of the high quality rubber, it has great physical and mechanical performances; the pallets, fittings and te air pipes adopts the engineering plastics ; so there is no rust problem ,it greatly reduces the operation and maintenance workloads.
 
Main performance parameters.
 
1.        Aerator size: 1 model D=260mm ; II model D=215mm
2.        Mean pore diameter of aerator membrane: 80-100 micron
3.        Air flow rate: 1.5-3m3/pcs.
4.        Service area: I model0.5-0.7 m2/pcs.    II model 0.35-0.5m2/pcs.
5.        Oxygen transfer coefficientkla: 0.204-0.337 mm.
6.        Oxygen Utillization Ratio : 18.4-27.7%.
7.        Oxygen transfer Ability: 0.112-0.185kgO2/m3.h
8.        Oxygen transfer power efficiency: 4.46-5.19 kgO2/KW.h.
9.        Aerator Resistance: 180-280mm.H2O.
 

Product Image

Micropore Aerator 1
Img 1
Micropore Aerator 2
Img 2
Micropore Aerator 3
Img 3
Micropore Aerator 4
Img 4

Send Inquiry to this Member

JP waterpower environment protection equipent co.,ltd.

No.922 Baoyuan building, Baoyuan roda, Baoan district.

Phone:
86-755-27908381
Fax:
86-755-27908382
Contact:
ketten (manager)
Mobile:
27908381

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Sewerage Made In China Products

,  

Sewerage China Suppliers and China Manufacturers