Weight sample cutter
Made in Shanghai
Name of Product: Weight Sample Cutter
Standard: 100X100=1/100m2(Radius: 112.840mm)
Weight Sample Cutter
Made in Shanghai
Name of Product: Weight Sample Cutter
Standard: 100X100=1/100m2(Radius: 112.840mm)
Material of knife: HSS (high speed tool steel)
Durability of knife: 10’000 times or 1 year at least
Warranty
1, In normal use, warrantee lasts up to one year after purchase. Although during warrantee period, knife’s damage by user’s abnormal use of machine should be paid to fix.
What is abnormal use of machine?
Cutting of materials those are not designated (for example…steel material, etc).
Use of cutting board that are not made from our company
Repair our products at any other place than this company or company that we appointed.
2, A charge after 1 year of warrantee and when there’s any problem. (Any parts will be provided in foreign countries.)
3, Abrasion of knife will be repaired or should be purchased by new parts.
Operation Manual
1, If pulling back a grip of Weight Sample Cutter Completely, the spaces between Knife and cutting board will be gradually wider.
2, After place textiles on the cutting board with rubber panel, and then locate textiles regions beneath the knife. Pull down the grip of Cutter until it makes sound like a “Ddalkak”,and then knives will absolutely cut the textiles.
3, After cutting textiles, pull back the grip of Cutter again to cut other side of textiles.
4, If a condition of knife not good for cutting textiles, turn over 3 knife holders on the left side or right side.
5, If there’s an unsatisfactory of cutting accuracy of textiles on cutting board, you should change the consumption panel.
6, Textiles or paper should be used for cutting material and never use of metal products.
7, Cutting rubber board should be replaced depends on the damage of the board.
8, You will just have to put 100th decimal points to read(Yard weight=0.83613)
