Home > Products > Electronics & Electricity > Electronic Instrument > Air & Gas Flowmeter

LWGY Liquid Turbine Flow Meter
 LWGY series Turbine Flow has its simple structure ,light-accuracy ,perfect repeatability ,sensitivity ,easy maintenance and use.It is widely used to measure liquid which has no chemical corrosive reaction with stainless steel 1Cr18Ni9Ti ,2Cr13,corundum Al2O3 and cemented carbide.This kind of measured liquid has no impurities such as fiber and particles.The movement viscosity is lower than 5×10-6m2/s at working temperature.If the viscosity is higher than 5×10-6m2/s,the flow meter should be calibrated in the liquid before use.It can finish amount control ,excess alert and etc,if matched with special functional displaying meter.It is the ideal meter for flow measuring and energy saving.
Product characteristics
1.High accuracy;Normal type can reach+1%R,+0.5%R.High accuracy type can reach to +0.25%R.
2.Excellent repeatability ,repeatability in a short tme can reach to 0.05%~0.2%,Because of excellent reoeatability ,customers can have entremely high accuracy if they often calibrate or calibrate on-line.It is preferred in trade settlement.
3.Output with pulse frequency signal ,suitable total flow measuring and computer connection.No zero drift and strong ability in anti-noise.
4.Can acquire very high frequency signal(3~4KHz),strong signal resolution.
5.Wide range:middle and large diameter can reach to 1:20,small diameter can reach to 1:10.
6.Compact and light structure,convenience in installation and maintenance,ability of large flow.
7.Suitable to measure in high pressure.No need to open aperture on the meter,so it is easy 8.Many models of dedicated sensors.Can design dedicated sensors of special requirements for customer,such as low temperature type,two-way type,sand specific type.
9.Can make plug-in type,suitable to large diameter measuring,little pressure loss,low price,can get out without flow cut off.convenient in installing and maintaining.