Features: LCD display Microprocessor based design Heat-Sink built in internal Soft Start AVR design Input & Output isolated Auto temperature control fan Reverse polarity protection. / by fuse / diodes / Output short circuit protection Temperature protection Overload protection Input low voltage protection Input high voltage protection Low battery alarm Low battery shut-down
Description: PURE SINE WAVE Inverters with LCD Display It is appropriate for the motor, fan, pump and inductive loads. Motor makes noise with modified sine wave but pure sine wave is fine to work.
Specifications:
Model No.
DE-2400SLU-12
DE-2400SLU-24
Output Power Continuous
2400W
2400W
Max. Surge Power
4800W
4800W
1. Input Section
Input Nominal Voltage
120Vac or 220Vac
InputVoltageRange
60V~135Vac or 120V~270Vac
Line Low Transfer
60Vac +/- 2% or 120Vac +/- 2%
Line Low Return
65Vac +/- 2% or 130Vac +/- 2%
Line High Transfer
135Vac +/- 2% or 270Vac +/- 2%
Line High Return
130Vac +/- 2% or 260Vac +/- 2%
Input Frequency
Auto 50Hz/60Hz (45Hz~75Hz)
2. Output Section
Output Voltage
110Vac / 115Vac / 120Vac or 220Vac / 230Vac / 240Vac re-settable via LCD panel
Waveform
Pure Sine Wave
Voltage Regulation (Batt. Mode)
< 3% RMS for entire battery voltage range
Output Frequency
ADJ. 50Hz or 60Hz +/- 0.1Hz
Total Harmonic Distortion Output THD
< 3%
Maximum Load
Up to short circuit
Asymmetrical Load Max.
Up to nominal output power
Overload and Short Circuit Protection
Automatic disconnection
Overheating Temperature Protection
Acoustic warning before shut-off. Automatic restart
Power Factor
0.8
LCD Display
UPS status, I/P&O/P Voltage Frequency, Load%,Battery Voltage & %, Temperature, Model
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content. To report fraudulent or illegal content, please click here.