Home > Products > Security & Protection > Other Security & Protection

The WT-1011RC GSM lift & Escalator reporting and monitoring system provides monitoring the working status of lift and escalator over GSM network. When there is a failure or power failure, the WT-1011RC GSM unit will automatically generate SMS alert to the pre-programmed telephone number (up to 8). It also allows you to monitor these alarms via GPRS or SMS connection by sending the data to your monitoring station computer.  Setting as well as controlling can be done remotely by SMS messages (Monitor lift status, lift reset etc.)

It can monitor up to 2 digital inputs. A pre-programmed alarm message can be sent to the pre-programmed phone number when lift or escalator failure. The user can also interrogate the inputs through SMS messaging.

It can also be used to monitor the daily operation of lift by counting how many times the lift or elevator goes up or down. It is prepared to count pulses of DC=70 ms and T=1.16.

The WT-1011RC also has 2 heavy-duty relay outputs which can be used to reset the lift or set off an audible alarm when lift or elevator failure. Output Relay 1 can be permanently switched ON or OFF by calling its phone number, there is no call charges incurred when dialing the unit as it will recognize an authorized telephone number calling it and reject the call without answering. Output Relay 2 can be programmed to switch on for a pre-determined length of time by sending the WT-1011RC a text command

Features:

1.      Support Dual-Band or Quad-Band GSM network

2.      2 digital inputs and 2 relay outputs

3.      Programming can be done by PC (software) or SMS (remotely)

4.      Monitoring by SMS mobile phone or Software

5.      Alert notification via SMS (up to 8 telephone numbers)

6.      Send pre-programmed SMS when lift or elevator failure

7.      Able to monitor up to 500 units with software monitoring

8.      Reset lift (Output Relay 1) can be done by phone call (No call charges incurred)

9.      Digital alarm inputs can be used to count pulses (Monitor lift daily operation) or activates the output relay (Set off an audible alarm)

10.  Backup Lithium rechargeable battery