Model: | BS-52/53 |
---|---|
Brand: | bysen |
Origin: | Made In China |
Category: | Consumer Electronics & Lighting / Lighting / LED Lighting |
Label: | t8 lamp , tube light , tube |
Price: |
-
|
Min. Order: | 1 pc |
Specifications:
Item | Value | Item | Value |
Voltage | AC110V/230V±10%V | Size(cm) | Φ3*60 / Φ3*120 |
Power | 10W/20W | Packing | 80x20x 130x23x |
Color | Daylight Warm white | Color temperature(K) | 5000-6000(purewhite) 3000-4000(warmwhite) |
Weight(10pcs) | Socket | MR16 | |
Net weight | Life time | 50000hrs |
Specified parameters:
Type NO. | Emitting color | Wavelength(Kelvin) | Luminous | Length | Power | NO.of LED |
BS-52-320 | Daylight | 5000-8000 | 1880LM | 20W | 320pcs | |
Warm White | 2600-4000 | 1800LM | ||||
BS-52-250 | Daylight | 5000-8000 | 1500LM | 18W | 250pcs | |
Warm White | 2600-4000 | 1450LM | ||||
BS-53-150 | Daylight | 5000-8000 | 900LM | 10W | 150pcs | |
Warm White | 2600-4000 | 850LM | ||||
BS-53-120 | Daylight | 5000-8000 | 750LM | 8W | 120pcs | |
Warm White | 2600-4000 | 700LM |
Features:
CE certification&ROHS compliance.
Use SMD 0.06W LED as lighting source.high illuminated efficiency.
Use aluminium housing, easily cooling and anode of surface prevent oxygenation, smooth and glossy surface.
Built with dedicated LED driver with PWM constant supply to ensure longer operating life and minimize light decay due to over-driven.
Applications:
³It is very nice replacement for the traditional T8 light with inductandce starter,can not replace the T8 CFL with electronic starter.
Notice:
uUser should read the manual before using this high power T8 bube light,otherwise it will induce short circuit,electric shock or fire.
ÖElectronic ballast must be removed before installed on a fixture with a ballast.connect the line,see Picture one.
ÖThe starter must be removed before installed on a fixture with inductance Ballast, and Check the power supply voltage before using.
Remark:
³Please pull out s (starter)before install T8 tube light on the fixture,or will induce short circuit or be dangerous.
Notice:
Ö Indoor use only.
Ö Do not touch tube when power is on.
Ö Input voltage is AC110±10%V or AC230±10%V.
Ö LED Input current:1W less than 350mA, 3W less than 600mA.