Home > Products > Packaging , Printing & Paper > Printing Materials

Automatic Grinder DMSQ-C type 
 

Automatic Grinder DMSQ-C type, it is our company set on the basis of the German Grinding technology, developed from the fourth generation of fully automatic adjustable speed knife grinder.

This type of sharpener made of high quality carbon structural steel, processed from the gantry structure of the fuselage; grinding Transmission rolling linear guides for the transmission; the middle of the cooling water ejected from the grinding wheel (water-cooled motor patented technology), the cooling Better; grinding head movement and wheel speed are imported inverter control, the speed is adjustable within the specified scope.

Automatic feed grinding wheel, grinding head with paste-type cylindrical grinding wheel, grinding wheel life increased to 1 / 3, which greatly reduces the cost of grinding and grinding back and forth adjustable.
This type of sharpener for sharpening the blade to face all kinds of lath (such as: joint line knife, toilet paper scraper, three-side trimmer, cutter, wood chipper, cutting blades used in such); is Printing, paper, wood, plastic leather, creating an ideal board grinding equipment and other industries.

Automatic Grinder DMSQ-C type is the best choice for sharpening center.

Automatic Grinder DMSQ-C type Main function/Technical parameters

● Water-cooled motor grinding German East Y series three-phase asynchronous motor
● Grinding head can move back and forth
● Maximum grinding width:  taken 22°as final 300 mm
● Frequency Control (travel mobile)
● Automatic feed grinding
● Wheel Chain Transmission
● Gantry body
● Magnetic chuck tool holder table
● Worm drive tool holder
● Table rotation angle: 0～±90°

Automatic Grinder DMSQ-C type Main Function Deployment (excerpt)

● Location rolling linear guide rail
● Centralized refueling device
● Scraper jig (optional device)
● Imported electrical components (optional device)

Automatic Grinder DMSQ-C type Main technical parameters

Wheel Size Φ200x100x 150mm（Φ300x100xΦ250）
Maximum grinding width taken 22°as final 300 mm
Effective height of the grinding wheel and table 80 mm
Table rotation 0～±90 °
Grinding rotation speed Adjustable Frequency
Grinding movement speed 5～15 m/min(Adjustable Frequency)
Movement electromotor power 0.55 KW
Grinding head motor power 3(7.5) KW
Pump motor power 0.25 KW

Note: Automatic Grinder DMSQ-C type, there grinding the length of 1.7m, 2.2m, 2.4m, 2.6m, 2.8m, 3m, 3.2m, 3.5m, 4m, 4.5m, 5m, 5.5m, 6m, 6.5m, 7m, 7.5, 8m, 8.5m, 9m, 9.5m, 10m, Total of 21 specifications.