Home > Products > Transportation > Car Parts & Components

The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech-2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2007
Features:
Authentic GM software in the Tech-2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech-2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional controls when performing power train, chassis, and body diagnosis.
Vetronix Tech-2 Specifications
Dimensions 12″×6″×2″
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for future expansion.
Communications Integral RS232 communication port.
Screen 3.8″×2.8″ backlit monochrome with full graphics capability: 320×240 pixels. Displays up to 9 vehicle parameters at once

GM Tech-2 Starter Kit with CANdi Module & TIS Kit includes (All ORIGINAL and NEW!):
l         Tech-2
l         3000164-CANdi module
l         memory card 32MB- 1pcs

kit of the cables:
l         3000095-DLC cable
l         3000096-Cigarette lighter power cable
l         3000097-Battery power cable
l         3000098-SAE 16/19 pin adapter (OBD2)
l         3000099- NAO 12/19 adapter
l         3000109-DLC loopback adapter (selftest)
 
l         DVD with software :
Opel TIS 01/2008,
SAAB TIS 1/2008,
NAO TIS 10/2007,
ISUZU TIS 03/2006;
manuals in DVD
 
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech-2 Flash and a CAN diagnostic interface module. The module connects between the Tech-2 Flash’s diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
The following GM vehicles utilize the CAN interface:
’05 Buick Allure (3.6L)
’05 Buick LaCrosse (3.6L)
’05 Buick Rainier (5.3L)
’04-’05 Buick Rendezvous (3.6L)
’04-’05 Cadillac CTS (3.6L)
’04-’05 Cadillac SRX (3.6L / 4.6L)
’04-’05 Cadillac XLR (4.6L)
’05 Cadillac STS (3.6L / 4.6L)
’05 Chevrolet Cobalt (2.2L)
’05 Chevrolet Corvette (6.0L)