BirdAway 987BF
Combines PIR, Ultrasonic, and Flashing Strobe to Chase Pest Birds Away!
The Bird-Away incorporates a sophisticated PIR (Passive Infrared motion detecting system) to monitor a 3 dimensional fan shape area of 70 degree arc at a distance of 12 meters, which is approx. 85 square meters of unobstructed space. When intruding creatures are detected, the Bird-Away will be triggered, which will simultaneously emit a flashing strobe light and a continuously variable sound frequency of 17,000 Hz – 24,000 Hz. The unwanted bird pests intruding the detected area will be scared away by the Bird-Away’s flashing strobe light plus ultrasonic sounds.
The Bird-Away can be used at any location without electricity as it is operated on 2 pcs. of 9V alkaline batteries. Battery power remains on stand-by mode when there are no movements detected. The device is equipped with a DC power input jack in case of heavy activity of unwelcome birds is noticed.
INSTALLATION:
1. Simply remove the main module from the mounting shelter gently. The main module will slide out.
2. Slide open the cover of the battery compartment at the back of the main module and install two new 9V alkaline batteries.
3. For the main operation, plug the proper adapter into the electric outlet.
4. Replace the main module by pushing it into the mounting shelter. Hang the Bird-Away at 1 to 2.5 meters above ground. Avoid obstructions within the operating area of the device.
5. Turn the power switch to “ON” position. After 30 seconds of warming up, you may see the flashing strobe with inaudible/audible sound. You may push the function button to shift the inaudible sound to audible sound to repel birds according to your need. Leave your Bird-Away on 24 hours.
6. It is also recommended that you experiment with various locations to find the most effective position to install the Bird-Away.
7. Under battery operation, if the flashing strobe does not light up when sensing movement within the protected zone, then it is time to replace batteries.
IMPORTANT NOTES:
l When anyone is in the protected area, turn off the device to preserve battery life.
l Do not immerse the device in water or any other liquid.
l Do not tamper with the device’s internal components.
l The PIR detecting system turns on and off as warm-blooded animal’s movement starts and stops.
l Make sure the detecting lens is clean. Do not handle the lens. Use a damp cloth to gently wipe off any dirt. Use no benzene, alcohol or paint thinner.
SPECIFICATIONS:
Dimension: 110 x 100 x 95 mm
Weight: 255 g
Power supply: 9V (2 x 9V alkaline battery)
AC adapter (optional) 220-240 VAC
100-120VAC, Output: 9VDC 200mA
Power: Standby current: 0.16mA
Exit delay time for ultrasound: approx.
25 seconds
Warm up time: about 30 seconds
Frequency range: 17,000 Hz to 24,000 Hz approx.
(randomly and continuously variable)
Protection coverage: up to 85 square meters,
fan shaped area of 70∘(horizontal);
9∘(vertical) at a distance of 12 meters
LED flashing strobe life: up to 100,000 hours
