JM Laser Hologram Ink is a solvent-based screen ink which applicable to most of the transparent plastics, especially for PET, PC, PVC, Acrylic and Glass. Perfect Holographic Rainbow Effect achieved by reverse printing with the highest degree of transparency for light reflections. JM Laser Hologram Ink can offer either a cost advantage over alternative technologies such as holographic foil, or a security feature for brand protection and product identification.
JM Laser Hologram Ink can be blended with the corresponding JM Mirror Effect Ink in any ratio to achieve the desired compromise between the strength of Holographic Rainbow Effect , Mirror Effect and applied costs.
Applications:
Mesh 110 – 300 polyester mesh (44T – 120T)
Stencil Anydirect emulsion and capillary film which are solvent resistant.
Squeegee Sharp edge, 65゚– 85゚blade
Dilution Formulated to print from the container with excellent properties,
add FM-009 Thinner while necessary to assure the excellent effect.
Should be well mixed before printing and fastened during storage.
Curing PC, PET - by solvent evaporation and forced dry at 120 – 130℃ in 20 – 30 minutes, 40 minutes at humidity.
PVC, PMMA - by solvent evaporation. Surface dry at room temperature then forced dry at 30 – 40℃ in 20 – 30 minutes.
Glass - by solvent evaporation. Forced dry at 150℃ in another 20 minutes for excellent adhesive performance.
Wash-up By specific Screen Wash.
Storage Dry indoor below 75% humidity in 90 days from the date of manufacture.
Standard Grades:
JM-5301 Ultra Fine
|
JM-5302 Fine
|
JM-5303 Medium
|
JM-5304 Bold
|
Printing Advices:
1. Always mix up before each application. The pigment, resin, promoter and additives would delaminate in storage since the weight difference.
2. Mesh in 110 – 300 (44T – 120T) is recommended since the low viscosity. Blade with proper hardness should be considered to minimize the printing stress.
3. Avoid violent airflow which leads screen blocking.
4. Apply slightly lower tension to the stencil.
5. To achieve the best effect, always avoid humidity and proceed curing immediately at low temperature after the printing procedure.
JM Laser Hologram Ink is conformed to ASTM F963-96a, EN71:Part3:1994 and RoHS directives.