Are you the (un)official office or home network cable guy? Or maybe you just like to make your own Ethernet patch cables. Either way this Network Cable Tester is a perfect tool to assist you with your wiring endeavors. It diagnose cable problems and checks correct pair mapping, RJ45 connections and overall cable lengths. It quickly identifies continuity problems such as short circuits, open wires, reversed pairs, crossed pairs, connection sequence, jumper or cross-talk interference and miswiring as well as if there are any breaks in the cable and how far down the line the break is.
A powerful special tool to prevent and solve cable installation problem. Easily maintain coaxial cables and phone lines around the home or office with this high quality tracker system. It is a useful tool to reduce cable installation cost and save cable installation time.
QUALITY
* Approved by strict quality and safety standards
* Durable and precise
* With CE marking, approved and passed the Europen Standard for health ans safety
SPECIAL FEATURES
* Check for wiring errors in 5E/6E twisted cord network, coaxial cables and telephone lines
* Identify open circuits, short circuits, jumper wires or crossfire, reverse connections, and cross-talk interference
* Locate both wiring and connection errors
* Measure length and pair with or without far-end recognizer
* Indicates pair integrity of the cable
* Measure cable length and determine the distance of open circuit and short circuit
* Check cable sequence
* Use TDR (time domain reflectometer), Measure length and distance, find the trouble location
* Determine continuity and wiring pattern
* 1 far-end passive test jacks
* Far end recognizer with prompt voice
* Self-check function and automatic temperature control
* Dynamically calibrate cable length
* Easy to use with large LCD screen
* Portable handheld unit benefits from long battery life
* 30 minute auto shut down saves batteries
* Service line test and no external adaptor is required
* Auto time delay shut off
* Single board computer software watchdog design and reliable operating
* Self-checking function and automatically compensates any change in battery capacity or ambient temperature
* Brand new, boxed and comes with 1 far-end passive test jack and intruction manual
* Packed Safely in a Standard Factory Box
SPECIFICATIONS
* LCD: 4 x 16 characters big LCD screen
* Type of Tester Cable: STP / UTP twin twisted cable, coaxial cable, telephone line
* Tester Port
* Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R)
* The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line
* Length Measurement of Twin Twisted Cable:
* Scope: 1 to 350M (3 to 1,200 FT) calibration
* Calibration accuracy: 3% (±0.5m or ±1.5 ft) (calibrating cable > 5 M)
* Shipment accuracy: 5% (±0.5m or ±1.5 ft) (AMP, AT&T Class 5 cable)
* Unit of Measurement: Display in meter (M) or feet (FT)
* Length Calibration: User can set self-calibration factor by a given length cable; The length of calibrating cable is more than 5M
* Wire Sequence and Locating Cable Error
* Check errors such as open circuit, short circuit, reverse connection, cross over or cross-talk interference
* Locating Cable: Included 1 far-end passive test jack
* Working Ambient Temperature: -10°C to 60°C
* Automatic Time-delay Shut Off Time: The tester is idle for 30 minutes
* Use 4 x AA batteries
* Item size: 180 x 80 x 40 mm
