Home > Products > Construction & Decoration > Pipe, Tube & Parts > Pipe Fittings

MSS SP-75 WPHY pipe fittings 1MSS SP-75 WPHY pipe fittings 2MSS SP-75 WPHY pipe fittings 3MSS SP-75 WPHY pipe fittings 4MSS SP-75 WPHY pipe fittings 5
  • MSS SP-75 WPHY pipe fittings 1
  • MSS SP-75 WPHY pipe fittings 2
  • MSS SP-75 WPHY pipe fittings 3
  • MSS SP-75 WPHY pipe fittings 4
  • MSS SP-75 WPHY pipe fittings 5

MSS SP-75 WPHY pipe fittings

Model:-
Brand:-
Origin:Made In China
Category:Construction & Decoration / Pipe, Tube & Parts / Pipe Fittings
Label:WPHY42 , MSS SP-75 , A860 WPHY
Price: -
Min. Order:-
Inquire Now Add to Basket

Member Information

Detail

Hebei Lufeng Piping Equipment Co., Ltd

Biz MemberHe Bei - China
Live Chat:
点击这里给我发消息Last Online:28 Apr, 2021

Product Description

ASTM A860 – Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings

 

Grade: WPHY42

 

Chemical Compositions (max, %) Heat analysis

C: 0.20

Mn: 1.00-1.45

P: 0.030

S: 0.010

Si: 0.15-0.40

Ni: 0.5

Cr: 0.3

Mo: 0.25

Cu: 0.35

Ti: 0.05

V: 0.1

Cb: 0.04

V+Cb: 0.12

Ti: 0.06

 

1. The carbon equivalent as calculated by the following formula, shall not exceed 0.42%:

CE=C+Mn/6+(Cr+Mo+V)/5+(Ni+Co)/15.

2.If vacuum carbon deoxidation is used, silicon shall not exceed 0.10% by heat analysis and 0.12% by product analysis.

3. The sum of Ni+Cr+Mo+Cu shall not exceed 1.0%.

 

Mechanical Requirements

Property

WPHY 42

Yield strength, minA 0.2 % offset, ksi [MPa]

42 [290]

Tensile strength, ksi [Mpa]

60 [415] −85 [585]

Elongation:

 

Standard round specimen, or small-size proportional specimen, min, % in 4D

25

Rectangular specimen, for section thickness 5⁄16 in. [7.94mm] and over, and for all small sizes tested in full section; min, % in 2 in. [50 mm].

32

Rectangular specimen for thickness less than 5⁄16 in. [7.94mm]; min, % 2 in. [50 mm]. Width of specimen 11⁄2 in. [40mm].

B

 

Toughness: Cv energy absorption C; measured at −50°F [−46°C].

Size, mm

Average/min, ft·lbs[J]

Lateral Expansion min, MLS[mm]

10 × 10

30/25 [40/34]

25 [0.64]

10 × 7.5

25/21 [34/28]

21 [0.53]

10 × 5

20/17 [27/23]

13 [0.33]

 

A) Actual yield strength shall not exceed specified minimum by more than 15 ksi [105 MPa].

 

B) For each 1⁄32-in. [0.79 mm] decrease in section thickness below 5⁄16 in. [7.94 mm], a deduction of 1.5 % from the elongation value of specimens above 5⁄16 in. [7.94mm] is permitted. When the section thickness lies between two values defined above, the minimum elongation value is determined by the following equation: E = 48t + 15.00

 

where: E = elongation % in 2 in. [50 mm], and t = actual thickness of specimen

 

C) These requirements are intended to minimize fracture initiation. The requirements are not intended to give assurance against fracture propagation.

 

Hardness Requirements

Fittings shall have a maximum hardness of 22 HRC (235 HB).


Payment Terms:TT

Product Image

MSS SP-75 WPHY pipe fittings 1
Img 1
MSS SP-75 WPHY pipe fittings 2
Img 2
MSS SP-75 WPHY pipe fittings 3
Img 3
MSS SP-75 WPHY pipe fittings 4
Img 4
MSS SP-75 WPHY pipe fittings 5
Img 5

Send Inquiry to this Member

Hebei Lufeng Piping Equipment Co., Ltd

Wuliyao Industrial Zone,Yanshan County,Hebei,P.R.China

Phone:
86-317-6218608
Fax:
86-317-6211182
Contact:
Sam (sales manager)
Mobile:
15028618344

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Pipe Fittings Made In China Products

,  

Pipe Fittings China Suppliers and China Manufacturers