Product Description
|
| LFS-01 vacuum pressure switch is applied to detection of both negative and positive pressure, such as the family vacuum cleaner. It is provided with solder pin connections and is especially designed for mounting on "Printed Circuit Boards", but can also be provided with different wire leads, terminals and socket. It is designed as an economical interface between pressure systems and Printed Circuit Boards with almost no hysteresis. |
|
|
  E228961
|
|
Model
|
LFS-01
|
|
Electrical Function
|
1 pole NO
|
|
Switch Rating
|
20 mA, 250 V [ cULus ]
|
|
Temperature
|
-10~95°C
|
|
Electrical Connections
|
Solder pins 1.0 mm, 10mm between away from each other; or wire leads with different insulation, diameter and length, socket
|
|
Pressure Range
|
Vacuum: 10mbar to 800mbar Pressure: 10mbar to 500mbar (1mbar=100Pa)
|
|
Sample Line Connections
|
Inlet 4.0 mm for tube connection
|
|
Medium
|
Non hazardous gas only
|
|
Fixing Methods
|
Soldering on PCB
|
|
Material
|
Housing
|
Polycarbonate
|
|
Contact Carrying Parts
|
Brass Silver Plated (Gold plating on request)
|
|
Membrane
|
Silicone Rubber
|
Conversion: 1mbar = 100 Pa 1 in/H2O= 249 Pa
|
|
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
