| Model: | LWGY |
|---|---|
| Brand: | SURE |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Other Electronic Instrument |
| Label: | Turbine Flowmeter , Vortex Flow Meter , Electromagnetic |
| Price: |
-
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:29 Nov, 2010 |
LWGY series turbine flow meters have the features: high accuracy, good repeatability, convenient installation/maintenance, simple structure etc.
Liquid flows through the turbine housing causing an internal rotor to spin. As the rotor spins, an electrical signal is generated in the pickup coil. This signal is converted into engineering units (liters, cubic meters, gallons etc.) on the local display where is applicable. Optional accessory modules can be used to export the signal to other equipment.^
Specification:
Performance
Repeatability: ±0.2%
Accuracy: Standard: ±1% of reading;
Optional: ±0.5% of reading or ±0.2% of reading
Wetted Components
Housing: Standard - 304 Stainless Steel
Optional - 316 Stainless Steel
Bearings and Shaft: Tungsten Carbide
Rotor: 2Cr13 Stainless Steel
Retaining Rings: 304 Stainless Steel
Output Signal: (Where applicable)
Sensor: Pulse signal (Low Level: ≤0.8V; High Level: ≥8V)
Transmitter: 4 to 20 mA DC current signal
Signal Transmission Distance: ≤1,000 m
Electrical Connections:
Basic Type: Hausman Connector or three-core cable
Explosion Proof Type: ISO M20×1.5 Female
Explosion Proof Level:
Standard: None
Optional: ExdIIBT6
Protection Level: IP65
| Nominal Diameter
|
Standard Flow Range (SFR) | Extended Flow Range (EFR) | Standard Pressure Rating | Customized Pressure Rating | |
| (mm) | (in.) | (m 3 /h) | (m 3 /h) | (MPa) | (MPa) - Flange Fitting |
| 4 | 0.15 | 0.04 to 0.25 | 0.04 to 0.4 | Thread: 6.3 | 12, 16, 25 |
| 6 | 0.25 | 0.1 to 0.6 | 0.06 to 0.6 | Thread: 6.3 | 12, 16, 25 |
| 10 | 0.4 | 0.2 to 1.2 | 0.15 to 1.5 | Thread: 6.3 | 12, 16, 25 |
| 15 | 0.5 | 0.6 to 6 | 0.4 to 8 | Thread: 6.3; Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
| 20 | 0.75 | 0.8 to 8 | 0.45 to 9 | Thread: 6.3; Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
| 25 | 1 | 1 to 10 | 0.5 to 10 | Thread: 6.3; Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
| 32 | 1.25 | 1.5 to 15 | 0.8 to 15 | Thread: 6.3; Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
| 40 | 1.5 | 2 to 20 | 1 to 30 | Thread: 6.3; Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
| 50 | 2 | 4 to 40 | 2 to 40 | Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
| 65 | 2.5 | 7 to 70 | 4 to 70 | Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
| 80 | 3 | 10 to 100 | 5 to 100 | Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
| 100 | 4 | 20 to 200 | 10 to 200 | Flange: 1.6 | 4.0, 6.3, 12, 16, 25 |
| 125 | 5 | 25 to 250 | 13 to 250 | Flange: 1.6 | 2.5, 4.0, 6.3, 12, 16 |
| 150 | 6 | 30 to 300 | 15 to 300 | Flange: 1.6 | 2.5, 4.0, 6.3, 12, 16 |
| 200 | 8 | 80 to 800 | 40 to 800 | Flange: 1.6 | |
