Product Description
The fuse assembly machine is a fully automatic operating system for the complete mounting of fine wire fuses. Set up as an indexing table principle a rotating table with 36 receivers operates as a central tool carrier
The fuse assembly machine produces fully automatic in-side soldered fine wire fuses of different dimensions. All variations from Ø 3,6 x 10 mm, Ø 4,5 x 16 mm, Ø 5,2 x 20 mm up to Ø 6,3 x 32 mm can be produced. The position of the wire fuse is diagonal or centrical straight.
Machine can be equipped with a hopper feeder and a level (fillstand) control system.
Defective tubes are sorted out by a vacuum control system. The fuse wire insertion system is controlled by a step-by-step motor. To solder the caps a hot air soldering unit (3 possible adjustments) is used, it's temperature is electronically controlled.
The finished parts are tested in a cap pull-off force device and in a length measuring station. The electrical testing is done in a 4-point contact station. A sorting unit sorts "good" and "no good" fuses.
The high-risk danger zone is covered by a safety cabin.
Further options: sand filling station, resistance measuring bridge, solder ball station.
produce the efficiency:3000 — 3600 EAs/ HR, can regulate to produce the speed according to * machine shape:( L)1300 mms*( W)800 mm*( H)1600 mm
Product Image
Img 1
Img 2
Img 3
Img 4
Img 5
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,