|Origin:||Made In United States|
|Category:||Chemicals / Resin|
|Label:||Ultramid 8202 , Capron 8253G , Carpon 8272G|
|Min. Order:||25 KG|
BASF added the Capron resins to its nylon 6 product line in May 2003 as part of the company’s acquisition of the Honeywell engineering plastics business.
May 12, 2004 -- BASF will apply its Ultramid name to the company’s entire line of nylon 6 engineering thermoplastics in North America. The first step in this process will take effect on July 1, 2004, when all nylon 6 engineering thermoplastics currently marketed as Capron will be renamed Ultramid.
low viscosity, general purpose PA6 injection molding homopolymer exhibitingexcellent melt fluidity for filling thin sections. It is also available in heat stabilized (Ultramid 8202 HS)
Carpon 8351HS (Ultramid)
heat stabilized, pigmented black, impact modified type 6 nylon graft copolymer developed for injection molding applications requiring a high level of toughness combined with a moderate flexibility and faster cycles. Excellent thermal and chemical resistance properties provided by the nylon backbone.
Carpon 8350HS (Ultramid)
heat stabilized, impact modified type 6 graft copolymer developed for extrusion, tubing, and jacketing applications requiring a high level of toughness combined with a moderate level of flexibility.
Carpon 8333GHIHS (Ultramid)
33% glass reinforced, impact modified PA6 injection molding compound pigmented black developed for applications requiring improved dry as molded toughness in combination with a balance of strength, stiffness and excellent moldability/surface aesthetics
Carpon 8281HS (Ultramid)
unreinforced, plasticized, heat stabilized nylon 6 rotomolding resin. Developed for applications requiring increased flexibility. It is also available in natural, black and can be painted. It exhibits excellent balance of engineering properties including strength, flexibility, and toughness combined with excellent abrasion resistance and self-lubricating properties associated with PA6.
Carpon 8272GHS (Ultramid)
12% glass fiber reinforced, black pigmented, thermally modified, PA6 blow molding compound offering an excellent balance of engineering properties combined with the melt strength ideally suited for blow molding and other applications requiring ultra high melt viscosity. It exhibits improved strength, stiffness and creep resistance compare to standard blow molding grades. Outstanding permeability and chemical resistance to oils, hydrocarbons and most solvents are other advantages along with excellent stiffness ad the ability to fabricate complex shapes for cost effective metal replacements.
Carpon 8270HS (Ultramid)
PA6 blow molding compound exhibiting exceptional toughness and melt strength ideally suited for blow molding, profile extrusion, and other applications requiring extra high melt viscosity. It exhibits excellent permeability and chemical resistance to oils, hydrocarbons and most solvents.
Carpon 8267GHS (Ultramid)
heat stabilized, weather resistant, 40% mineral and glass fiber reinforced PA6 injection molding compound with improved UV resistance and sink mark resistance. The combination of mineral and glass fibers result in a high performance, low warp and cost effective engineering thermoplastic. It exhibits high strength, good UV resistance, rigidity and good heat distortion temperatures. It has a relatively high resistance to creep under load. The heat stabilizer system extends its retention of properties at elevated temperatures. It has good chemical resistance to greases, oils and hydrocarbons
Carpon 8260HS (Ultramid)
heat stabilized, pigmented black, 40% mineral reinforced PA6 injection molding resin. It possesses high stiffness, dimensional stability and heat resistance combined with excellent processability including low warp and resistance to sink-mark formation. It maintains its inherent chemical resistance to greases, oils and hydrocarbons.
Carpon 8253,8253HS (Ultramid)
unfilled type 6 graft copolymer developed for both injection molding and extrusion applications. It is also available in heat stabilized (Capron 8253 HS) and/or pigmented versions. Copolymerization results in improved dry as molded toughness and increased flexibility to meet higher impact performance compared to conventional unreinforced homopolymers. Good nylon thermal and chemical properties are maintained along with good strength and stiffness retention.
applications such as plugs, receptacles, flexible connector covers, weed trimmer components, clips, fasteners, flanges, key housings as well as many flexible tubing applications.
Carpon 8255HS (Ultramid)
heat stabilized, impact modified type 6 nylon graft copolymer developed for both injection molding and extrusion applications. It exhibits varying levels of toughness and flexibility combined with excellent thermal and chemical resistance properties provided by the nylon backbone. It maintains its inherent chemical resistance to greases, oils and hydrocarbons.
Carpon 8231GHS (Ultramid)
heat stabilized, 14% glass fiber reinforced PA6 injection molding compound. The glass fiber reinforcement enhances performance such as strength, stiffness and heat deflection temperature. The heat stabilizer system extends the properties at elevated temperatures. It also has excellent chemical resistance to greases, oils and hydrocarbons.
Capron 8233G ,8233GHS (Ultramid)
33% glass fiber reinforced polyamide 6 molding compound offering excellent strength, stiffness, high temperature performance and dimensional stability. It is also available in heat stabilized (Capron 8233G HS)
applications such as power tool housings, weed trimmer components, gears,
automotive housings and under hood applications.
|Type||Color No.||Material No.||Origin||Availalbe|
|ULTRAMID 8202||GY145||50121137||China||1,000 kg|
|ULTRAMID 8202||WT6407||50395389||China||1,200 kg|
|ULTRAMID 8202HS||BK102||54717822||USA||5,000 kg|
|Ultramid 8272GHS R01||BLACK 102||50474399||China||3,000 kg|
**Any about about CAPRON inquire E-mail to: firstname.lastname@example.org