Home > Products > Transportation > Car Parts & Components

This is a carbon fiber heating pad.
1. Composition
It will connect with a switch, and a controller .
2. Assemble
(1)First, put the two pads on your seat and at the back of the seat. Link the line which has four thin lines to the seat and link the line which has two thin lines to the back of the seat.
(2)Link the wires' cathode(red line)to the place where the current is more than 10A, but make sure the engine is not working and there is no current. Make sure they are secure connected.
(3)Link the wires' negative(black line)to the ground line. Make sure they are secure connected.

(4)There is a thin yellow line that connect with the switches, link this line to the night light, when turn on the light, the symbol on the switch which stands for heating will shine green light.
(5)When the lines are connected, link the line which has four lines and the line which has two lines to the lines which connect with electrodes.
(6)At last, make everything is in the right place.

3. How to use
(1)There are five/three levels, "0"means turn off it. "1"stands for the lowest temperature "5"stands for the highest.
(2)No matter which level it is, if you want to turn it off just turn to level "0".
(3)There is a white point between level 1 and 2, 2 and 3, 3and 4, 4and 5. This is a level as well. For example, when you feel cold at level 3 but hot at level 4, you can choose the white point, actuaily, it is not five levels but NINE levels.

4. Points for attention
(1)No matter which level it is, if you want to turn if off, turn to level"0".
(2)If the light on the switch is not light, use a screwdriver and change a new one.
(3)The cathode(red line) must links to the place where the cerrent is more than 10A, the black line must links to the ground line.
(4) The line of the night light should connect with the switch of the light.

Detailed Product Description

Carbon fiber heating pad features:

Smocking carbon fiber: One-time smocking to form pattern of carbon fiber in the max. size of 550×300mm.The matchless characteristics is no wrinkles on  the surface, unanimous power density, and hence providing even heating.

Amount of carbon fiber used: Amount of carbon fiber used: ≥ 25m. The stitch: 1mm (0.39inch) to 1.5mm (0.59inch) Providing heating more evenly

Double-coated adhesive tape: The advanced special glue equipment is used. There are 10mm of both edges of the backing uncoated adhesive, so that the backing is easily ripped open and installation time is shorten.

Electrode tape: 7 to 11 strands metal wires electroplated with silver; The width of the tape: 16mm(0.624in) to 18mm (0.709in.); The thickness of electroplated silver layer: 5μm; The metal wires are taken anti-oxidation process, the life time is increased, and the heating power will not be attenuated in the long run.

Press-fit technology: Special copper-belt equipments are used

Adhesive glue: Special high/low temperature resistant glue is used; Special equipments are used to glue; Conformance with automobile industry QC/T413 standard

Sleeves of conductors: PET monofilament is first time applied to the seat heaters; The wear and bending resistance of the wires are increased.
Special equipment is used to weave main connection wires by specialized plant

Connection terminal and housing: AMP series products

Thin film pressure sensor of human body: Owns autonomous intellectual property right;All products can be installed with such function

Switches with autonomous intellectual property right

Specifications:

Working voltage: 10.5-15V or 22-28V
Working current: 1.8- 2.5A single pad
Working power: 15*30W×2
Temperature controlled: 30 (lowest) to  70 (highest)
Connector clip:AMP
Guarantee period: 3 years
Size of pad: according to the request of buyer max. 300×550mm