Home O3 SPA Supersonic Hydropathy Facility
Product Description
1.Facility principle
Scientists who make this SPA facility plan to place a sophisticated energy soft cushion. This SPA facility can output O3 anion at a very high speed per second, thousands of tiny bubbles would erupted through the delicated base, and can then prodcued 80,000 to 100,000 HZ natural supersonic energy.
According to Japanese scientists test report, merits of this SPA facility include; warm, massage, cleanify, beauty treatment,
2.Specification
Model
|
|
O3 Density
|
250 mg / hr
|
Power Consumption
|
480 W
|
Specification
|
43 x 34 x 20 (cm)
|
Power Supply
|
220 V / 110V
|
Weight
|
8.5 kg
|
Rated Voltage
|
50 Hz / 60 Hz
|
Output Air Flow
|
86 litter / sec.
(under water pressure 180 litter)
|
3.Installment
Type A
In case of the backflow, please place the facility 50 cm above water, be sure to place the facility firmly.
Type B
-
Fixed it on the wall and higher than bathtub
-
Paste the “scale”on the proper location ( cannot lower than bathtub)
-
Use the electric drill to dig
-
Nailed the plastic-nail on the hole
-
To nailed the steel-nail on the plastic-nail, be sure to keep 10 mm outside the hole
-
Hang on the facility
-
Place the soft bubble on the bottom of the bathtub, pour water onto the cuishon
-
Connect the extendable pipe with the SPA facility and the soft air bubble cuishon, press the bolt and inser it.
-
Plug and choose suitable water temperature, enjoy it.
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,