Home > Products > Industrial Supplies > Apparel & Fashion Machine

(detail specification):

(Model)： GB-D 

(Name)： Half automatic shaking head double location heat press machine

(technical parameter)：

(voltage):110v 220V  380V

(power):2250W                      

(Temperature range)：0-399℃

(Time range)：0-999ses

(air pressure)：8kg

(size of worktable)：  38*38             

(size of package)：    110*90*90     

(weight)：                  120kg            

(usage):  

The machine can transfer sublimation and solvent ink picture to textil cloth.It also can do the heat treatment about screen print,plasmagel and so on.Meanwhile it can print photos,picture on the vitrolite and steel plate.It is widely usded to make madal,tombstone picture,shirts and so on.It is economical and banausic.

(features);

It can operated by both manual and pneumatic single shaking head

Digital control system and PID micro computer control ensure the hight pricision(0.5℃）.

Digital display make sure  precise time;Auotmatic controlling make the pressure well-proportioned—can reach 8kg/cm.

The heat pipe connect with the heat plate,the special design of the heat plate ensure the safety and fast heat conductivity.

The pressure can be adjust,the operation is easy.So it can be widely used in flow line production.

The appearance is exquisite.Automaticly shake head can print two objects,thus greatly inprove the work efficiency.The whole structure is steady and not proteiform, operating smoothly and steadly, less noisy.

The operation of worktable can be changed between manual and automatic.Digital control system will give prompt call after finished the process.It is precise,safe,and long use life.

The worktable was treated by special precess,thus it can print sulimation,hot stamping transfer and stamping objects.

(Operation process)：

Turn on the power switch,adjust the temperature,time and air pressure to the needed one.

When the temperature reached the setted one,turn the switch to “manual” begain to test.After confirm the quality is good enough,turn the switch to “automatic” start to volume-produce.

When the switch on “manual”,press the heat plate untill the temperature reached the setted one.If the stamping position is not right,press “engency stop”;when the switch on the “automatic”,push the heat plate to needed position and then it will press automatically.

(notice)：

The machine should connect with safe earth protect.

(maintenance)：

If the air pressure is too small or big,you can adjust the presure-regulating valve.(take care whether there is oil on the air bottle)
(temperature)：

when the temperature reached the setted one but the heat plate is not hot or heat evenly,please check the connection of temperature controller and the thermocouple.

When the switch on “manul”,if it is not press,pls check the “manual” switch;when the switch on the “automatic,the bedplate is on the laction but not press,pls check the micro movement switch.