Eleven-in-One CCTV security tester
Combine the video test, Optical Power Meter, Digital Multi-meter, PTZ controller, video signal level test, NTSC/PAL color pattern generator, UTP cable test, PTZ protocol analysis, PTZ address scan, DC12 1A output, Audio test to one body.
Video Test
Signal Mode: NTSC/PAL (Auto adapt)
Display: 3.5 inch digital TFT-LCD, 960*240 resolution
LCD Adjustment: Brightness, Contrast, Saturation adjustable
Video IN/OUT: 1 channel BNC input & 1 channel output
Video Output Mode: 1.0 Vp-p
PTZ Controller
Communication: RS232, RS422 simplex and RS485
PTZ Protocol: Compatible with more than 20 protocols such as PELCO-D/P, Samsung, Panasonic Lilin, Yaan, etc.
Baud Rate: 150,300,600,1200,2400,4800,9600,19200bps
Video Signal Generation
Color Bar Generation: Output channel colorbar video signal for testing monitor or video cable
UTP Cable Test
Test UTP cable connection status and display in the screen. Read the number of the test box.
PTZ data Capture and display
Capture and analyze the PTZ data sent from controlling device
PTZ address scanning
Search up the ID of PTZ camera
Optical Power Meter
Testing the laser power of Video Fiber Optic Transmission equipment, and testing the Fiber Optic Patch Cord , etc.
Digital Multimeter
Voltage, current, resistance and capacitance measuring, continuity testing, diode testing.
Video Level Test
Video signals measured in IRE or mV
DC 12V 1A Power Output
Output DC 12V 1A power for camera
Audio Input Test
Test the pickup and other audio equipments on the front-end
RS485 Data Analyst
Data Monitor: Captures and analyzes the command data from controlling device
Power
Power Adapter: DC5V, 2A
Battery: Built-in 3.7V Lithium polymer battery, 3000mAh
Rechargeable: After charging 4.5 hour, working time lasts 12hours
Low Consumption: Energy saving technology
General
Working Temperature: -10℃ to 50℃
Working Humidity: 30% to 90%
Dimension/Weight: 112*189*47mm/500g
