Home > Products > Industrial Supplies > Tools > Pneumatic Tools

The rock drill is used for rock drilling, blasting holes and other drilling works in the quarries, small coal mines and other constructions.
    It’s suitable for drilling of horizontal or inclined holes on the medium-hard and hard rock. When it’s matched with air leg Model FT100, it can blast holes from different directions and angles.
    Blast hole diameter is between 36mm and 42mm. with an efficient depth from 1.5m to 2m.
    It’s recommended to be matched with Model py-1.2/0.39 air compressor which is powered by Model RS1100 diesel engine. Other suitable air compressors can also be matched with this rock drill.

Specification

Weight	18kg
Overall length	550mm
Cylinder dia.	58mm
Piston stroke	45mm
Air pipe inner dia.	19mm
Water pipe inner dia.	8mm
Shank dimensions	22×108mm
Water pressure	3.9-5.9×105Pa
Air pressure	≤at 3.9 MPa
Air consumption（at3.9×105 Pa）	<1.2m/min(22.6L/S)
Average speed (at 3.9×105Pa )	80mm
Impact energy(at4.9×105Pa )	24.5J(31Hz)
Torque(at4.9×105Pa )	7.85N·m
Airconsumption(at4.9×105Pa )	≤1.35m/min
Average speed(at4.9×105Pa )	120mm
FY200 oil lubricator
Weight	≤1.2kg
Oil capacity	200mm
FT100 air leg
Weight	11kg
Propulsion stroke	810mm
Cylinder  dia.	52mm
Length	1312mm