Home > Products > Chemicals > Organic Chemical Materials > Organic Acid

Activity of Catalyst (gPE/gcat，Ordinary State)

Appearance

Application Device

Application & Specialty

TH-1
（Ⅰ）

5000～6000 (resin bulk density: 0.38-0.40 g/cm³)

taupe
powder

Applied mainly for full density polyethylene equipment with UNIPOL and BP process, at ordinary or super-frozen state.

For the production of polyethylene products like LLDPE, MDPE, HDPE

TH-1
（Ⅱ）

6000～7000
(resin bulk density: 0.36-0.38 g/cm³)

taupe
powder

Applied mainly for full density polyethylene equipment with UNIPOL and BP process, at ordinary or super-frozen state.

For the production of polyethylene products like LLDPE, MDPE, HDPE

TH-1
（Ⅲ）

7000～10000
(resin bulk density: 0.34-0.36 g/cm³)

taupe
powder

Applied mainly for full density polyethylene equipment with UNIPOL and BP process, at ordinary or super-frozen state.

For the production of polyethylene products like LLDPE, MDPE, HDPE

TH-1L
（A）

Over 18000

slurry

Applied for full density polyethylene equipment with UNIPOL process, operated at high load frozen state. Real time deoxidization is necessary. Different types of resin can be produced by regulating the deoxidization of catalyst.

For the production of polyethylene products like LLDPE, MDPE, HDPE

TH-1L
（B）

Over 30000

slurry

Applied for full density polyethylene equipment with UNIPOL process at non-frozen and frozen state, requiring no real time deoxidization.

For the production of LLDPE, MDPE, HDPE. No carrier contained in catalyst, ash content of resin can be reduced.

TH-2
（A）

4500～6000

pea green
powder

Applied for high density polyethylene equipment with UNIPOL and BP gas phase fluidized bed process.

Producing resin with the melt flow index of 1.4～2.5g/10min, and the density of 0.948～0.955g/cm³, mainly used to mould various containers with a volume bigger than 200 liter.

TH-2
（BⅠ）

4500～6000

pea green
powder

Applied for high density polyethylene equipment with UNIPOL and BP gas phase fluidized bed process.

Producing resin with the melt flow index of 8.0～15g/10min and the density of 0.947～0.953g/cm³, used as special materials for film.

TH-2
（BⅡ）

4500～6000

pea green
powder

Applied for high density polyethylene equipment with UNIPOL and BP gas phase fluidized bed process.

Producing resin with the melt flow index of 8.0～17g/10min and the density of 0.939～0.948g/cm³, used to extrude products. It can be used to produce pipes conforming to PE80 and PE 100 standard.

TH-2
（BⅢ）

4500～6000

pea green
powder

Applied for high density polyethylene equipment with UNIPOL and BP gas phase fluidized bed process.

Producing resin with the melt flow index of 12～21g/10min and the density of 0.949～0.956g/cm³, used to make containers with a volume less than 20 liter.

TH-2
（BⅣ）

4500～6000

pea green
powder

Applied for high density polyethylene equipment with UNIPOL and BP gas phase fluidized bed process.

Producing resin with the melt flow index of 7.0～14g/10min and the density of 0.945～0.952g/cm³, used to make containers with a volume less than 100 liter.