Home > Products > Computers & AV Digital > Network Hardware & Parts

Features

• One 100Base-BX10 single fiber network port

• One CATV optical signal fiber input port

• Four 10/100Base-TX Half/Full duplex switch ports

• 2048 MAC address table (4-way hashing)

• Four queues for QOS (1:2 or 1:4 or 1:8 or 1:16) 

• Priority features by Port-Based, 802.1p, IP TOS, Diffserv, TCP/UDP Port Application-Based of packets

• Port-based VLAN and 802.1Q VLAN. Up to 16 VLAN groups are implemented by full 12 bits VID matching

• Store & forward architecture and performs forwarding and filtering at non-blocking full wire speed

• An aging function and 802.3x flow control for full duplex and a backpressure function for half duplex

• Packet lengths up to 1518/1522 (Default)/1536/1784 bytes in maximum

• Scalable Per Port Bandwidth Control (Both Ingress and Egress)

• Congestion Flow Control (HOL)

• Easy Management 32-bit smart counter for per port RX/TX byte/packet count, 16-bit smart counter for per port ERROR count and Collision count

• 32 hardware IGMP table (Multicast Table)

• MAC address table is accessible

• Supports 802.1x security function

• Supports 802.1d spanning tree protocol

• Broadcast/Multicast storm suppression

• Wide 40 MHz ~ 870 MHz bandwidth supports CATV analog channels or a combination of analog and digital channels including HDTV broadcast

• Excellent RF frequency and distortion characteristics for high linearity

• Internal proprietary impedance match circuitry with one 75Ω coaxial-cable output port

• High sensitivity of 75 or 90 dBuV RF output at –3dBm optical input.

Network Protocol and Standards

• IEEE802.3 10Base-TX Ethernet
• IEEE802.3u 100Base-TX fast Ethernet
• IEEE802.3u 100Base-FX optical Ethernet
• IEEE802.3ah 100Base-BX10
• IEEE802.3x flow control
• IEEE802.1p priority
• IEEE802.1q VLAN
• IEEE802.1d multiple spanning trees
• IEEE802.1x security function
• TCP/IP, DHCP

Port Configuration

• One 100Base-BX10 WAN port.
• One CATV optical signal input port.
• Four 10/100Base-TX LAN ports.
• One 75Ω coaxial-cable CATV port with RF bandwidth of 45~860MHz or 45~1000MHz.

CTAV Specifications

• One 75Ω coaxial-cable CATV output port
• RF bandwidth of 45~860MHz or 45-1000MHz
• 75 or 90 dBuV RF output at –3dBm optical input
• CNR≥51dB
• CSO≤-65dBc
• CTB≤-65dBc

Optical Interface

• 100Base-BX10 WAN port: Single single-mode fiber, dual wavelength Rx:1550nm/TX:1310nm., SC/PC connector, operating distance 15km.
• CATV optical signal fiber input port, Single single-mode fiber, wavelength: 1310nm or 1550nm; SC/APC connector, operating distance 15km(minimum input light power -5dB).

Physical, Environmental and Electrical

• Dimensions: 220mmх160mmх43mm.
• Weight: 1.25Kg
• Operating temperature: 0℃ ~ 50℃
• Storage temperature: -25℃ ~ 55℃
• Humidity: 5% ~ 95% RH Non-condensing.
• Power Supply: DC12V or AC15-18V using external adaptor
• Power Consumption: 6W