Home > Products > Computers & AV Digital > Computer Components > I/O Card

Detailed Product  Descrition ：

   1394 card

1）-Best compatibility - Based on NEC uPD72873 chip 2） -32-bit CardBus PC Card Type II standard compliant  3）  -Three 6-pin 1394a ports 4） -IEEE 1394-1995 Standard compliant, for High Performance Serial Bus and P1394A Supplement 4.0  5）-1394 OpenHCI specification V1.0 and V1.1 compliant  6）-Data transfer rate: 100/200/400 Mbps   7）-12V DC power jack Physical
8）-Dimensions: 115.5 x 54 x 13.8 mm     9）-Weight: 50G    10）-PC or Macintosh computer with one PC Card slot     11）- MS Windows 98SE/Me/2000/XP, Mac OS

  USB card

1）-Four USB type A connector   2） -32-bit CardBus PC Card Type II standard compliant
3）-USB 2.0 specification compliant   4）-Open Host Controller Interface specification for USB Rev 1.0a compliant   5）-Enhanced Host Controller Interface specification for USB Rev 0.95 compliant   6）-Data transfer rate: High speed 480Mbps, Full speed 12Mbps and Low speed 1.5Mbps  7）-External 12VDC DC jack for high current consumption devices  8）-Computer with one PC Card slot   9）-MS Windows 98SE/Me/2000/XP    10）-Mac OS (available on request)

  SATA card

1)-Best compatibility - Based on SIL3112 chipset     2)-Specification General   3)-32-bit CardBus PC Card Type II standard compliant  Serial-ATA Interface  4)-Serial ATA Specification Revision 1.0 compliant   5)-Dual independent DMA channels with 256KB FIFO per Serial-ATA channel, transfer rate up to 1.5Gb/s     6)-Serial-ATA port x 2
Features
1)-Quick & easy installation-ideal for any mobile executive  Support Hot Swap and Plug-n-play.  2)-Compliant with Serial ATA Specification Revision 1.0   3)-Supports Serial ATA(Generation 1)transfer rate of 1.5Gb/s(150MB/s)   4)-Compliant Programming Interface for Bus Master IDE Controller Revision 1.0     5)-Supports two independent Serial ATA channels     6) -Independent 256-byte FIFOs per Serial ATA channel for host reads and writes    7)-Supports 32 bit CardBus Type II slots.

serial card

1)Bus:PCMCIA Type II slot    2)Port:One RS-232 Serial Port    3)Connector:One DB9 Male connector   4)UART:Support all UART types from 450 up 950(fully programmable)   5)Data Rate:Up to 15 Mbps   6)128-byte deep transmitter/ receiver FIFO   7)3.3V low power operation , also compatible with 5V systems     8)Plug& Play and Hot Swap capability    9)R edized case with removable cable    10)Supports Windows 95 /98 /98SE / ME / NT / 2000 / XP   11)Package contents    12)1 x RS- 232 CardBus Adaptor    13)1 x DB 9 Male Cable (25 cm in length)    14)1×User Manual

 lan  card

1. )Note book Ethernet card   2)   Support 10M and 100M N-way auto-negotiation operation.   3 .)Compliant with PCMCIA cardbus 10/100m    4. )RJ-45, Frank insert