36W AC to DC Adapter desktop
Product Description
◆Feature |
|
|
·Universal AC output/Full range |
·No load power consumption <0.5W |
·Meet energy star level IV(CEC) for 5.0V~36V |
·Protection: short circuit/ overload |
·Full output 5.0V~36V safety approval |
·Fully enclosed plastic case |
·Approved by CB,CE,GS
Input |
Voltage range |
90~264Vac, 135~370Vdc |
Frequency range |
40~63Hz |
AC current |
0.9A/100Vac |
Inrush current (max.) |
30A/230Vac |
Leakage current(max.) |
0.25mA/240Vac |
Protection |
Over load |
>110% rate output voltage power for 5.0V~36V |
Protection type:hiccup mode,recovers automatically after fault condition is removed |
Short circuit |
Power shutdown |
Auto recovery after fault condition is removed |
Environment |
Working Temp. |
0~40℃ |
Working Humidity |
20%~90% RH non-condensing |
Storage Temp. Humidity |
-20℃~85℃, 10%~95% RH |
Temp. Coefficient |
±0.03%/℃ (0~50℃) |
Vibration |
10~500Hz, 2G 10min/ cycle,period for 60 min,each along X,Y,Z axes |
Safety & EMC |
Safety Standard |
UL60950, EN60950,EN61558 |
Withstand voltage |
I/P-O/P:3KVac, 1 minute |
Isolation resistance |
I/P-O/P: 100M ohms/500Vdc/25℃/70%RH |
EMI condition & radiation |
Compliance to EN55022 class B, FCC part15 class B |
Harmonic current |
Compliance to EN6100-3-2,3 |
Others |
MTBF |
100Khrs min, MIL-HDBK-217F(25℃) |
Dimension |
105mm*45mm*27.8mm |
Packing |
120pcs/Carton |
Connector |
Plug |
According to client's requirement |
Cable |
18# or 20#, other type available by client's requested |
Note |
1.Al l parameters are specified at 230Vac input, rated load,25℃ 70% RH ambient; |
2.DC voltage: the output voltage set at point measure by plug terminal & 100% load; |
3.Ripple & Niose are measured at 20Mhz bandwidth by using a 30cm twisted-pair wire terminated with a 0.1uf & 47uf parallel capacitor |
4.Tolerance: includes set up tolerance, line regulation, load regulation, |
5.Line regulation is measured from low line to high line at rated load, |
6.Load regulation is measured from 0%~100% at rated load |
7.Efficency is measured at 100Vac, |
8.The power supply is considered a component which will be installed into a final equipment.The final equipment must be |
re-confirmed that is still meets EMC derectives |
|
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,