Force non-silicon heat conduction paste
HTCP not only has the high quality heat conduction performance, but also has not silicon-based oil emulsion merit. The HTCP special performance originates from the different metal oxide compound (silicate material) the powder innovation application. These materials belong to the insulator, even if therefore this kind of paste body will stick in module's other parts will not cause the leakage. HTCP does not contain the silicon, also eliminated the resistance which caused because of the silicon slipping to increase, electric arc or machinery attrition question, when welding caused the similar question because of the silicon also similarly to avoid. HTCP should be suitable the situation which must diverge rapidly in the massive heat degree, usually the heat source radiation is through several different material conduction, but is not the convection radiates. What should pay attention, the heat conduction paste body will only be helpful to the radiation, therefore may apply on the overall system Intermediate-range thermal properties worst contact surface. This is the radiation product usual use. the coefficient of heat radiation and the temperature difference, material level's thickness, and the material heat conduction performance has the direct relation. Yi Ligao the company produces a series of row comprehensive radiation product, including silicon-based or non-silicon radiation paste (HTS and HTC), RTV rubber (CTR), coherence epoxy resin (TBS) and seal resin (ER2074). this company also has this kind of radiation material silicon-based product, the model is HTSP. application method: squeezes out one thin sliver, spreads in semiconductor equipment's and so on rectification group, semiconductor thyratron, transistor, self-operated thermostatic control, heat sink, resistor bases and on the support bolt. characteristic:
* does not have the slipping. the * temperature range is broad. under the * high temperature's heat conduction performance is remarkable. * easy to operate, amount used economy. * low poisonous. the * white material causes the processing unit change recognition. the * volatility weight loss is small. canonical parameter: color: White parent metal: Synthesis fluid mixture heat conduction ingredient: Dust shape metal oxide compound thermal conductivity: 2.50(W/mk) density @20°C: 2.04g/cm3 temperature range: -50 -- +130 volatility weight loss: 0.50% coefficient of dielectrical loss @ 106Hz: 4.2 (96 hour @100°C IP-183) dielectric resistance: 1x1014 ohm /cm insulation strength: 42KV/mm permeability: 210-250 base oil flash point: >280°C packing: the 20ml injector installs the ordering number: HTCP20S 1Kg packs in a barrel HTCP01K
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here
China Suppliers Quick Searching: