Home > Products > Industrial Supplies > Construction Machine

Equipment features:

    Used for milling processing of the profile bending parts of aluminum curtain wall;

    There is pulling device at the bottom and middle position which is convenient for the different size processing;

    Milling cutters can work in horizontal and vertical way;

    The interval subsection orientation device and the lock device are set in the movable frame;

    The slot depth can be adjusted for the special designed cutters;

    Processing range (L×W): 4000×1800mm;

Main specification and technical parameter

Power supply: three-phase and four line 380V 50Hz                              

Cutting motor power:  2.2KW                                             

Motor rotary speed: 2800r/min                                                   

Cutting width: max 1800mm                                                                

Cutting height: max 4000mm

Milling cutter size: φ250×φ30×16mm    

Blower fan power: 1.5KW                                                       

Contour dimension: 5000mm×2120mm×2830mm        
Weight: 800Kg                                                                  

Equipment Processing accuracy

Groove linear in horizontal milling ≤0.25/1000mm;

Groove linear in vertical milling ≤0.25/1000mm;

Cutting surface roughness Ra12.5∪m                                     

Two IS vertical slots max deviation from standard line ≤1;                  

The parallelism of two milling slots in the same direction ≤0.25/1000mm