| Model: | HF6K,HF10K |
|---|---|
| Brand: | IEAS |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Power Supply & Distribution / UPS |
| Label: | UPS , ONLINE UPS , POWER SUPPLY |
| Price: |
-
|
| Min. Order: | 10 pc |
| Live Chat: | Last Online:05 Oct, 2008 |
|
Model |
HF6K |
HF10K |
||
|
Rated Power |
VA/W |
6kVA/4.2kW |
10kVA/7kW |
|
|
Input |
Nominal Voltage |
220VAC |
||
|
Voltage Range |
176 ~ 276VAC |
|||
|
Frequency Range |
46 ~ 54Hz |
|||
|
Power Factor |
0.98 |
|||
|
Connection |
Hardwired |
|||
|
Output |
Voltage |
220VAC/230VAC/240VAC ± 1% |
||
|
Frequency |
Sync with input frequency. If input frequency is out the range of 46Hz – 54Hz(57Hz – 63Hz), the output frequency is 50Hz(60Hz) × (1±0.2%)Hz. 50Hz or 60Hz×(1±0.2%)Hz 〔 battery mode 〕 |
|||
|
Waveform |
Sine Wave |
|||
|
Power factor |
0.7 |
|||
|
Voltage Distortion |
2% under linear load |
|||
|
Overload Capability |
105% ~ 130% for 10 min., ³ 130% for 1 min. |
|||
|
Current Crest Ratio |
3:1 max. |
|||
|
Connection |
Hardwired |
|||
|
Battery |
Type |
Sealed, Maintenance free, Lead-Acid |
||
|
Quantity |
20 pieces |
|||
|
Back-up time (full load) |
7 min |
5 min |
||
|
Recharge time |
8 hrs to 90% of capacity after full load discharge |
|||
|
Transfer time |
0 ms |
|||
|
LED OR LCD |
Status |
Load level/Battery level, Battery , Utility power, Inverter, Bypass, Overload, Fault |
||
|
Audible alarm |
Bypass |
Alarm beeps every two minutes |
||
|
Battery discharge |
Alarm beeps every four seconds, every second if battery low |
|||
|
Overload |
Alarm beeps two for every second |
|||
|
Fault |
Alarm beeps continuously |
|||
|
Acoustic noise |
At 1 meter distance |
£ 55 dB |
||
|
Communications |
DB-9 Port |
RS232 serial interface |
||
|
Intelligent Slot |
Options: WebPower, AS400 or WinPower CMC |
|||
| Environmental |
Operating temperature |
0 ~ 40 ° C |
||
|
Operating humidity |
20% ~ 90% non-condensing |
|||
|
Weight |
Net (kg) |
84 |
180 |
|
|
Dimensions |
W x D x H (mm) |
260 ＊ 555 ＊ 710 |
340 ＊ 640 ＊ 980 |
|
|
Model |
HF6KS |
HF10KS |
||
|
Rated Power |
Volt-Amps/Watts (VA/W) |
6kVA/4.2kW |
10kVA/7kW |
|
|
Input |
Nominal Voltage |
220VAC |
||
|
Voltage Range |
176 ~ 276VAC |
|||
|
Frequency Range |
46 ~ 54Hz |
|||
|
Power Factor |
0.98 |
|||
|
Connection |
Hardwired |
|||
|
Output |
Voltage |
220VAC/230VAC/240VAC ± 1% |
||
|
Frequency |
Sync with input frequency. If input frequency is out the range of 46Hz – 54Hz(57Hz – 63Hz), the output frequency is 50Hz(60Hz) × (1±0.2%)Hz. 50Hz or 60Hz×(1±0.2%)Hz 〔 battery mode 〕 |
|||
|
Waveform |
Sine Wave |
|||
|
Power factor |
0.7 |
|||
|
Voltage Distortion |
2% under linear load |
|||
|
Overload Capability |
105% ~ 130% for 10 min., ³ 130% for 1 min. |
|||
|
Current Crest Ratio |
3:1 max. |
|||
|
Connection |
Hardwired |
|||
|
Battery |
Type |
Sealed, Maintenance free, Lead-Acid |
||
|
Nominal DC Voltage |
240VDC |
|||
|
Back-up time |
Depends on the capacity of the external battery bank |
|||
|
Connection |
External Battery Socket |
|||
|
Transfer time |
0 ms |
|||
|
LED OR LCD |
Status |
Load level/Battery level, Battery , Utility power, Inverter, Bypass, Overload, Fault |
||
|
Audible alarm |
Bypass |
Alarm beeps every two minutes |
||
|
Battery discharge |
Alarm beeps every four seconds, every second if battery low |
|||
|
Overload |
Alarm beeps two for every second |
|||
|
Fault |
Alarm beeps continuously |
|||
|
Acoustic noise |
At 1 meter distance |
£ 55 dB |
||
|
Communications |
DB-9 Port |
RS232 serial interface |
||
|
Intelligent Slot |
Options: WebPower, AS400 or WinPower CMC |
|||
|
Parallel Port |
up to three units in parallel for power redundancy and load sharing |
|||
|
Environmental |
Operating temperature |
0 ~ 40 ° C |
||
|
Operating humidity |
20% ~ 90% non-condensing |
|||
|
Weight |
Net (kg) |
45 |
92 |
|
|
Dimensions |
W x D x H (mm) |
260 ＊ 555 ＊ 710 |
340 ＊ 640 ＊ 980 |
|
