Home > Products > Electronics & Electricity > Remote Control

RM-E90 is an advanced Multi-Purpose Remote Control. RM-E9Ohas a large built-in database. After simple formatting, you can use RM E90 to control your 6 home electric appliances, namely TV/TXT, VCR, DVD and SAT(CABLE) directly. RM E90 possesses a power failure memory function. You do not need to re-format RM-E90 after replacing the batteries. RM-E90 is usersfriendly. Tt is a remote comtrol for a large variety of home electric appliances. Tt is your first choice to substitute lost or broken remote controls. You can use RM-E90 interchangealy with your other remote controls.

Parameter        

Model: RM-E90 Weight: (g) 

Compatible: Combination Remote Batteries: 2*AAA 

Can material: ABS Transmitting

distance：>8M  

Size: 219*52*30 MM 

SERIES: TV/TXT, VCR, DVD and SAT(CABLE)... 

Setting method of product   

1.Switch on your home electric appliance manually. Place RM-E90 directly in front of your home electric appliance, i.e. Your television.

2.Press the "TV" button on RM-E90, until the signal light is switched on. （Note: When any of the Electric Appliances Selection Buttons is pressed, the signal light will be dimmed once, and then it will be switched on again)

3.Press the "Volume +" Button and the "Channel +" Button at the same time. Do not release both buttons. Release both buttons only when the signal light is switched on. (The Procedure is as follows: The signal light is switched off---> The signal light flashes twice --> The signal light is switched on)

4.Keep on pressing the "Main Power" buttonuntil the television shuts down. Release the button and stop searching.

5. Check if the other buttons are in a working condition. heck if the setting Procedure is completed. If the buttons do not function, please repeat Steps 2 to 5.

RM E98

Your wise selection of our product is deeply appreciated.

RM E98 is the latest type of the Multi function Remote Controller. By simple setting of this Remote Controller, most household electronic appliances, such as TV, VCR, DSS, HIFI, CD, VCD, can be easily controlled

Parameter        

Model: RM-E98        Weight: (g) 

Compatible: Combination Remote Batteries: 2*AAA 

Can material: ABS Transmitting

distance：>8M  

Size: 220*52*28 MM 

SERIES: TV, VCR, DSS, HIFI, CD, VCD 

Setting method of product   

1、Turn on the controlled electronic appliance, and hold the Remote Controller to aim at the receiving point of the appliance.

2、Press the button of set, at the same time press the button of type selection.

3、When the Indicator Light is on, do not press the above two buttons.

4、Press the button of set again, the Indicator Light will be flashing, and the Remote Controller begins to search automatically.

5、Then every two seconds press power (each press will bring about different codes)

(In searching, if you can turn off the controlled appliance, the searching will be ended in 2 seconds according to your selection of types).

6、Check whether operation of other buttons is at normal state. If so, your setting is successfully accomplished..