Home > Products > Construction & Decoration > Slate, Marble, Granite & Stone > Fireplace

3D fireplace in Penta Hotel, Jinan China

BB 3D Water Vapour Electric FireplaceSpecification

1. Custom made

2. Used the wood log or the stone on the surface of the fireplace.  Approx. height of the wood log is 150-200mm;

3. The power supply is 250V  10A  flame power 210W

4. Normally the water capacity is 1.5 liter or more depends on the size of the fireplace

5. We need air to come into the fireplace to produce the flame with smoke that makes come out from the wood or stone like burning.

6. Do not move the fireplace after fill of pure water otherwise the fireplace will be broken with short circuit.

7. BB 3D three dimension fireplace needs pure water, not tap or dirty water.

How to install

1) Put the 3D fireplace in the place that will be installed.

Turn off the power point. Take out the wood logs or stone. Than take the water task out for water refill. 

2) Refill the pure or distil water, do not use the tap water. Be careful not to overflow the water.  Put the water task back the origin position. One liter of water can used for 10 hours depends on the fire size.

3) Put the wood logs or stone back and turn on the power. About 3 minutes, the flame and smoke will come our automatically.

4) If you want to move the fireplace, please take out all the water out before moving, otherwise the fireplace will be short circuit and damaged.

We recommend the 3D water vapour fireplace not used more than 10 hours.

If the fireplace running out of water, that means there only light and have no smoke or fire. You have to close it for half an hour to cool it down and refill it with pure water.

Our contact email is peter@bbfires.com  

Telephone：852-67625988， 

weixin ：13714791523

Peter Ma